Code 25 - Chinese 25 - CipherLab 2564MR User Manual

2564MR Barcode Scanner
If "Max/Min Length" is selected, the maximum length and the minimum length must be

specified. It only accepts those barcodes with lengths that fall between max/min lengths
specified.
If "Fixed Length" is selected, up to 2 fixed lengths can be specified.

Note: The specified length(s) must include the check digit(s) the barcode contains.
1) Read the barcode to enable either Max. /Min. Length qualification or Fixed Length(s)
qualification.
2) Read the barcode for Max. Length or Fixed Length 1, and follow steps 3~4.
Repeat steps 2~4 for Min. Length or Fixed Length 2.
3) Read the "Decimal
4) Read the "Validate" barcode on the same page to complete this setting.
4.5 CODE 25 – CHINESE 25
124
User Guide
Value" barcode on page 263 for the desired length.
*Enable Max./Min.
Length (1~55)...
Enable Fixed
Length(s)...
Max. Length (*55) or
Fixed Length 1
Min. Length (*4) or
Fixed Length 2
Enable
*Disable
Enter Setup