Reset Connection - CipherLab 2564MR User Manual

2564MR Barcode Scanner User Guide

2.1.2 RESET CONNECTION

For BT HID, you can only have the scanner connected to one computer at a time. If you
want to connect the scanner to another host, you must have it read the "Reset Connection"
barcode so that the current connection record will be cleared. Then, the scanner will restart
to establish a
itself automatically. Go through the whole process in 3.2.3 Connect to Dongle
new connection.
Reset Connection
Note: The "Restore System Defaults" barcode will have the current connection record
cleared as well.
54
Enter Setup