CipherLab 2564MR User Manual page 118

The procedure goes through associating devices for establishing a WPAN connection, which
is pretty much the same except for the software you are using. If your computer is running
®
Microsoft Windows
can use the software support that Windows
device manufacturer provides. Now, let's try using the software support that Windows
Service Pack 2 includes.
BT HID Procedure
By default, BT HID is activated on the scanner, and the keyboard type is set to PCAT (US). When BT
HID is re-activated, you will have to select a keyboard type to complete this setting.
The procedure is the same as for BT SPP. Refer to steps 1~11 below.
BT SPP Procedure
1. Turn on the Bluetooth
2.
Double-click the Bluetooth
Alternatively, you may go to Control Panel > Bluetooth Devices.
3. Click [Add] to search devices nearby.
4. Turn on the scanner with correct WPAN settings, such as select BT SPP or BT HID, broadcasting
enabled, authentication enabled, and PIN code specified, etc. Select the check box of [My device
®
XP Service Pack 3 (SP3) or Windows Vista
®
function on your computer, running Windows XP SP2.
®
icon from the lower right of the taskbar.
Chapter 3 Setting up a WPAN Connection
®
includes, or you can use the driver that the
Update
®
Service Pack 1 (SP1), you
®
XP
107