2564MR Barcode Scanner
4.1 CODABAR
4.1.1 START/STOP TRANSMISSION
Decide whether to include the start/stop characters in the data being transmitted.
4.1.2 CLSI CONVERSION
When enabled, the CLSI editing strips the start/stop characters and inserts a space after the
first, fifth, and tenth characters of a 14-character Codabar barcode.
Note: The 14-character barcode length does not include start/stop characters.
4.1.3 CODE LENGTH QUALIFICATION
To prevent the "short scan" error, define the "Length Qualification" settings to ensure that
the correct barcode is read by qualifying the allowable code length.
116
User Guide
*Enable
Disable
Transmit Start/Stop
Characters
*Do Not Transmit
Apply CLSI Editing
*Do Not Apply
Enter Setup