Table of Contents
Advertisement
Purpose
To use variable Virtual COM port when connecting more than one cradle to PC via USB.
Here is the setup barcode for this serial command:
Version<CR>
Purpose
To get the firmware versions.
Here is the setup barcode for this serial command:
GetID<CR>
Purpose
To get MAC ID.
Here is the setup barcode for this serial command:
Download<CR>
Purpose
To download CPU firmware to the cradle via RS-232 or USB.
Here is the setup barcode for this serial command:
EXAMPLE
Without using the scanner to read the above setup barcodes for configuring the cradle, you
may run HyperTerminal.exe on the host computer to send serial commands to the cradle via
RS-232 or USB.
Appendix II
Host Serial Commands
UseVariablePort
Version
Download
Update
GetID
257
Advertisement
Table of Contents
