2564MR Barcode Scanner
1.3.2 GOOD READ LED DURATION
By default, the Good Read LED stays on for 40 milliseconds. Specify a value, ranging from
1 to 254 in units of 10 milliseconds.
1) Read the barcode above to specify the time interval before the Good Read LED goes off.
2) Read the
"Decimal
LED to go off after 150 milliseconds.
3) Read the "Validate" barcode on the same page to complete this setting.
32
User Guide
Value" barcode on page 263. For example, read "1" and "5" for the
*Enable
Good Read LED
Disable
Good Read LED
Good Read LED
Time-out after
0.01~2.54 sec.
(*40 ms)
Enter Setup