2.1.5 INTER-FUNCTION DELAY
By default, the inter-function delay is set to zero. Specify a value, ranging from 0 to 254 in
units of millisecond, to match the computer response time of the keyboard interface. Such
delay time is inserted between every function code (0x01 ~ 0x1F) being transmitted. The
longer the delay time is, the slower the transmission speed will be.
1) Read the barcode above to specify the inter-function delay.
2) Read the
"Decimal
(millisecond).
3) Read the "Validate" barcode on the same page to complete this setting.
2.1.6 HID CHARACTER TRANSMIT MODE
By default, HID interface sends data to the host in batch. You may have the scanner read
the "By Character" barcode to process data one character at a time.
Note: "By Character" transmit mode is required when working with iPhone or iPad. It's
recommended that the Auto-Correction function on your iOS keyboard should be
turned off.
Value" barcode on page 263 for the desired inter-function delay
Chapter 2
Selecting Output Interface
Inter-Function
Delay... (*0~254)
*Batch Processing
By Character
Update
61