Gs1 Formatting - CipherLab 2564MR User Manual

2564MR Barcode Scanner

4.11.3 GS1 FORMATTING

Decide whether to enable GS1 formatting for GS1-128. When enabled, code ID transmitting
will be disabled; however, the field separator and application ID mark characters will be
automatically added to the output data.
You may want to add an application ID mark (1 character long) to the left (AIMark1) or right
(AIMark2) of an application ID (AI) for the purpose of labeling it when formatting the GS1
data.
1) Read the barcode above to add a mark to the left (AIMark1)/right (AIMark2) of an
application ID.
2) Read the "Hexadecimal
if you want to remove the AI mark.
3) Read the "Validate" barcode to complete this setting.
134
User Guide
Value" barcode on page 264 for the desired character. Read '00'
Enable GS1
Formatting
*Disable GS1
Formatting
AIMark1
AIMark2
Enter Setup