Transmit Check Digit; Code Length Qualification - CipherLab 2564MR User Manual

4.14.2 TRANSMIT CHECK DIGIT

Decide whether to include the check digit(s) in the data being transmitted.

4.14.3 CODE LENGTH QUALIFICATION

To prevent the "short scan" error, define the "Length Qualification" settings to ensure that
the correct barcode is read by qualifying the allowable code length.
If "Max/Min Length" is selected, the maximum length and the minimum length must be

specified. It only accepts those barcodes with lengths that fall between max/min lengths
specified.
If "Fixed Length" is selected, up to 2 fixed lengths can be specified.

Note: The specified length(s) must include the check digit(s) the barcode contains.
1) Read the barcode to enable either Max. /Min. Length qualification or Fixed Length(s)
qualification.
2) Read the barcode for Max. Length or Fixed Length 1, and follow steps 3~4.
Repeat steps 2~4 for Min. Length or Fixed Length 2.
Chapter 4 Changing Symbology Settings
*Last Digit Not
Transmitted
Both Digits
Transmitted
Both Digits
Not Transmitted
*Enable Max./Min.
Length (1~55)...
Enable Fixed
Length(s)...
Update
143