CipherLab 2564MR User Manual page 95

2564MR Barcode Scanner
By default, the inter-character delay is zero. Specify a value, ranging from 0 to 254 in units
of millisecond, to match the computer response time. Such delay time is inserted between
every character being transmitted. The longer the delay time is, the slower the transmission
speed will be.
1) Read the barcode above to specify the inter-character delay.
2) Read the "Decimal
(millisecond).
3) Read the "Validate" barcode on the same page to complete this setting.
2.5.8 INTER-FUNCTION DELAY
By default, the inter-function delay is set to zero. Specify a value, ranging from 0 to 254 in
units of millisecond, to match the computer response time of the keyboard interface. Such
delay time is inserted between every function code (0x01 ~ 0x1F) being transmitted. The
longer the delay time is, the slower the transmission speed will be.
1) Read this barcode above to specify the inter-function delay.
2) Read the "Decimal
(millisecond).
3) Read the "Validate" barcode on the same page to complete this setting.
2.5.9 ACK/NAK TIMEOUT
By default, the scanner sends data to the host without waiting for an ACK/NAK response
before sending more data. Specify a value, ranging from 1 to 99 in units of 0.1 second. If no
response within the specified period of time, the scanner will attempt to send the same data
two more times. If all three attempts fail without any notification, data loss will occur.
1) Read the barcode above to specify the time interval for the scanner to send data and
wait for a response from the host.
2) Read the "Decimal
scanner to automatically shut down after being idle for 1 second.
84
User Guide
Value" barcode on page 263 for the desired inter-character delay
Value" barcode on page 263 for the desired inter-function delay
Value" barcode on page 263. For example, read "1" and "0" for the
Inter-Character
Delay... (*0~254)
Inter-Function
Delay... (*0~254)
ACK/NAK Time-out
after ... (*0~99)
Enter Setup