APPLICATION ID MARK
You may want to add an application ID mark (1 character long) to the left (AIMark1) or right
(AIMark2) of an application ID (AI) for the purpose of labeling it when formatting the GS1
data.
1) Read the barcode above to add a mark to the left (AIMark1)/right (AIMark2) of an
application ID.
2) Read the
"Hexadecimal
if you want to remove the AI mark.
3) Read the "Validate" barcode to complete this setting.
4.25.6 MicroQR
4.25.7 AZTEC
Value" barcode on page 264 for the desired character. Read '00'
Chapter 4
Changing Symbology Settings
AIMark1
AIMark2
*Enable MicroQR
Disable
*Enable Aztec
Disable
Update
171