Decode Setting; Aiming Pattern; Decoding Illumination; Illumination Brightness - CipherLab 2564MR User Manual

3) Read the "Validate" barcode to complete this setting.
1.17 2D DECODE SETTING

1.17.1 AIMING PATTERN

Enable/Disable the aiming pattern during scanning.

1.17.2 DECODING ILLUMINATION

Enable/Disable illumination during scanning.
Enabling illumination usually results in superior images. The effectiveness of the

illumination decreases as the distance to the target increases.

1.17.3 ILLUMINATION BRIGHTNESS

Specify the illumination brightness level ranging from 1 to 10 for the 2D reader. The default
value is 10 which represents 100% illumination brightness.
1) Read the barcode above to configure the illumination brightness.
2) Read the "Decimal
3) Read the "Validate" barcode to complete this setting.
Value" barcode on page 263 for the desired setting value.
Chapter 1 Understanding the Barcode Scanner
*Enable
Disable
*Enable
Disable
Set Illumination
Brightness Level for
2D Reader 1~10 (*10)
Update
49