Maxicode; Qr Code - CipherLab 2564MR User Manual

2564MR Barcode Scanner

4.25.4 MAXICODE

4.25.5 QR CODE

GS1 FORMATTING
Decide whether to enable GS1 formatting for GS1-Data QR Code barcodes. When enabled,
the field separator and application ID mark will be automatically added to the output data.
FIELD SEPARATOR (GS CHARACTER)
Decide whether to apply a field separator (to convert the GS control character to human
readable character). The field separator is automatically added to the data when GS1
formatting is enabled.
1) Read the barcode above to specify field separator.
2) Read the "Hexadecimal
3) Read the "Validate" barcode to complete this setting.
170
User Guide
Value" barcode on page 264 for the desired character string.
*Enable Maxicode
Disable
*Enable QR Code
Disable
Enable
*Disable
Specify Field
Separator...
Enter Setup