CipherLab 2564MR User Manual page 31

The current settings of all scanner parameters can be sent to the host computer for user
inspection. The listing includes pages as shown below. You can select the page of interest by
having the scanner read the "List Page x" barcode. The scanner will respond with two beeps
(low-high tone) and send the selected page to the host immediately.
List settings regarding Firmware Version, Serial
Number, Interface, Buzzer, and Other Scanner
Parameters
List settings regarding Prefix, Suffix, and Length
Code Setting (1/2)
List settings regarding Prefix, Suffix, and Length
Code Setting (2/2)
List settings regarding Code ID
List settings regarding: Readable Symbologies
(1/2)
List settings regarding: Readable Symbologies
(2/2)
List settings regarding Symbology Parameters
(1/3)
List settings regarding Symbology Parameters
(2/3)
List settings regarding Symbology Parameters
(3/3)
Reserved
List settings regarding Editing Format 1
(1/2)
List Page 1
List Page 2
List Page 3
List Page 4
List Page 5
List Page 6
List Page 7
List Page 8
List Page 9
List Page 10
List Page 11
Update
Quick Start
19