Table of Contents
Advertisement
2564MR Barcode Scanner
Working Mode
Upon powering up, the scanner will try to establish a connection with the BT cradle or a computer with
®
Bluetooth
wireless technology. Refer to
connection between the scanners and the cradle is made easy and reliable.
Note: If RS-232, USB Virtual COM or BT SPP is selected for output interface, the host can
directly send serial commands to configure the scanner. For example, run
HyperTerminal.exe and type the 6-digit command located under each setup barcode.
Refer to
Appendix II Host Serial
12
User Guide
Chapter 3 – Setting up a WPAN Connection
Commands.
for details. The
Enter Setup
Advertisement
Table of Contents
