Getting Familiarized With The Scanner And The Cradle; Installing The Battery To The Scanner - CipherLab 2564MR User Manual

2564MR Barcode Scanner

GETTING FAMILIARIZED WITH THE SCANNER AND THE CRADLE

INSTALLING THE BATTERY TO THE SCANNER

When you first receive the package, the rechargeable battery is stored separately from the
scanner. Insert the battery into the scanner first so that it can be charged when sitting in the
cradle.
Note: Any improper handling may reduce the battery life.
1) Hold the scanner still and insert the battery into the battery compartment at the bottom
of the scanner.
2) Slide the battery latch to lock the battery in the compartment.
3) Hold down the trigger about 2 seconds to turn on the scanner.
4) The scanner will respond with a long beep and its LED will come on-off shortly.
Note: (1) To turn off the scanner, remove the battery.
(2) For shipping and storage purposes, save the scanner and the battery separately.
This will keep the battery in good condition for future use.
When the battery charge becomes low, you will find the scanner cannot emit scan
beam and its power-on beep sounds differently.
2
User Guide
Enter Setup
(3)