Table of Contents
Advertisement
1.6.2 LASER MODE
The scanner will start scanning once the trigger is held down.
The scanning won't stop until (1) a barcode is decoded, (2) the pre-set timeout expires,
or (3) you release the trigger.
Note: Refer to "Scanning Timeout".
1.6.3 AUTO OFF MODE
The scanner will start scanning once the trigger is pressed.
The scanning won't stop until (1) a barcode is decoded, and (2) the pre-set timeout
expires.
Note: Refer to "Scanning Timeout".
1.6.4 AUTO POWER OFF MODE
The scanner will start scanning once the trigger is pressed.
The scanning won't stop until the pre-set timeout expires, and, the pre-set timeout
period re-counts after each successful decoding.
Note: Refer to "Delay between Re-read" and "Scanning Timeout".
Chapter 1
Understanding the Barcode Scanner
*Laser Mode
Auto Off Mode
Auto Power Off Mode
Update
39
Advertisement
Table of Contents
