Connect To Dongle - CipherLab 2564MR User Manual

2564MR Barcode Scanner
Use random PIN
No PIN required
Note: When using BT HID, some device driver may not support pre-defined PIN code for
authentication. In this case, make sure you have the scanner set to "No PIN or use
random PIN" before pairing. While pairing, the host PIN code will be displayed on the
computer screen. Have the scanner read the setup barcode "Enter PIN Code in
Decimal" or "Enter PIN Code in Hexadecimal" to input the matching PIN code. Refer
Disable Authentication or Use Random
to
Secure Simple Pairing (SSP)
Secure Simple Pairing (SSP), introduced in Bluetooth
designed to ease the pairing process while keeping up the communication security level. This function
is disabled by default.

3.2.3 CONNECT TO DONGLE

106
User Guide
PIN.
®
Core Specification 2.1 + EDR, is a new feature
*Disable
Enable
Enter Setup