Illumination Brightness; Serial Number Stamp; Separator Between Serial Number Stamp And Data - CipherLab 2564MR User Manual

2564MR Barcode Scanner

1.15 ILLUMINATION BRIGHTNESS

Users can adjust the illumination brightness of the LED light source. Specify a value ranging
from 1 to 10 to set the brightness level which is set to 10 by default meaning 100%
illuminated.
1) Read the barcode above to commence the adjustment.
2) Read the "Decimal
level.
3) Read the "Validate" barcode on the same page to complete the setting.

1.16 SERIAL NUMBER STAMP

Decide whether to add the device serial number in front of the data transmitted.

1.16.1 SEPARATOR BETWEEN SERIAL NUMBER STAMP AND DATA

Scan the barcode below to specify the separator character between device serial number
and the accompanying data. By default, the separactor is a comma symbol.
1) Read the barcode above to specify a separator character.
2) Read the "Hexadecimal
48
User Guide
Value" barcode on page 263 for the desired illumination brightness
Value" barcode on page 264 for the desired character.
Enable
Illumination
Brightness (1~*10)
Add serial number in
front of data
*Disable
Specify the
separator character
Enter Setup