Table of Contents
Advertisement
2.1.10 SIMPLE PAIRING FOR IPHONE/IPAD
The window requiring pairing passcode is always pop-up when you are using a Bluetooth
connection to an iPhone or iPad. To connect to iOS-based devices more quickly, scan the
barcode below to enable Bluetooth
will not show up when establishing a connection. By default, this function is set to Disable.
Note: Simple pairing only supports to the device with Bluetooth
2.1.11 BT HID SLAVE/MASTER SWITCHING
By default, the BT HID role is set to slave. Users can have the scanner switch between slave
and master by reading the barcodes below.
2.1.12 BT HID AUTO-RECONNECTION
Users can decide whether to have the scanner automatically reconnect to a paired device
after disconnection, and the occasion for reconnecting.
Chapter 2
®
simple pairing so that the passcode-required window
*Auto reconnect
immediately
Auto reconnect on
data being scanned
Selecting Output Interface
Fast
*Disable
Enable
®
v2.1 or later.
*Slave
Master
Update
®
63
Advertisement
Table of Contents
