Inter-Function Delay - CipherLab 2564MR User Manual

2564MR Barcode Scanner
1) Read the barcode above to specify the inter-character delay.
2) Read the "Decimal
(millisecond).
3) Read the "Validate" barcode on the same page to complete this setting.

2.6.4 INTER-FUNCTION DELAY

By default, the inter-function delay is set to zero. Specify a value, ranging from 0 to 254 in
units of millisecond, to match the computer response time of the keyboard interface. Such
delay time is inserted between every function code (0x01 ~ 0x1F) being transmitted. The
longer the delay time is, the slower the transmission speed will be.
1) Read the barcode above to specify the inter-function delay.
2) Read the "Decimal
(millisecond).
3) Read the "Validate" barcode on the same page to complete this setting.
94
User Guide
Value" barcode on page 263 for the desired inter-character delay
Value" barcode on page 263 for the desired inter-function delay
Inter-Character
Delay... (*0~254)
Inter-Function
Delay... (*0~254)
Enter Setup