Table of Contents
Advertisement
DEFINING OUTPUT FORMAT
You may configure in which format the collected data will be output to the host computer.
Barcode read by the scanner will be processed in the following sequence -
1) Perform character substitution on the data scanned.
2) Add
Code ID
and
3) Process the whole data in step 2 with user formats. Data is now divided into fields by
user specified rules. Refer to
4) Add
Prefix Code
Data][Suffix Code]
IN THIS CHAPTER
5.1 Letter Case .............................................................. 175
5.2 Character Substitution ............................................... 176
5.3 Prefix/Suffix Code ..................................................... 188
5.4 Code ID ................................................................... 189
5.5 Length Code ............................................................ 196
5.6 Multi-Barcode Editor .................................................. 203
5.7 Removal of Special Character ..................................... 207
5.8 AIM Code ID ............................................................ 208
5.1 LETTER CASE
By default, the alphabets transmission is case-sensitive, meaning that the alphabets will be
transmitted according to their original case. Ignoring the original letter case, select [Upper
Case] to output data in upper case only; otherwise, select [Lower Case] to output data in
lower case only.
Length Code
to the front of the data:
Chapter 6 Applying Formats for Data
and
Suffix Code
[Code ID][Length Code][Data]
before transmission:
*Normal
Upper Case
Lower Case
Update
Chapter 5
Editing.
[Prefix Code][Processed
175
Advertisement
Table of Contents
