Activate Bt Hid & Select Keyboard Type - CipherLab 2564MR User Manual

2.1.1 ACTIVATE BT HID & SELECT KEYBOARD TYPE
When BT HID interface is activated, you will have to select a keyboard type to complete this
setting. By default, BT HID is activated on the scanner, and the keyboard type is set to PCAT
(US).
1) Read the barcode above to activate BT HID and select a keyboard type.
2) Read the "Decimal
of desired keyboard type.
3) Read the "Validate" barcode on the same page to complete this setting.
BT HID
By default, the keyboard type is set to PCAT (US). The following keyboard types are supported —
No. Keyboard Type
64 PCAT (US)
65 PCAT (French)
66 PCAT (German)
67 PCAT (Italy)
68 PCAT (Swedish)
69 PCAT (Norwegian)
70 PCAT (UK)
71 PCAT (Belgium)
Value" barcode on page 263. Refer to the table below for the number
Chapter 2
Activate BT HID &
Select Keyboard
Type...
No. Keyboard Type
72 PCAT (Spanish)
73 PCAT (Portuguese)
74 PS55 A01-2 (Japanese)
75 User-defined table
76 PCAT (Turkish)
77 PCAT (Hungarian)
78 PCAT (Swiss German)
79 PCAT (Danish)
Update
Selecting Output Interface
53