Table of Contents
Advertisement
1.2.2 MEMORY MODE
The scanner keeps 4 MB flash memory for memory mode operation. When the scanner is in
memory mode, it means any real-time connection established with host is disabled.
Warning:
No real-time connection is allowed unless the memory mode is disabled.
Memory Data Delay
You may set a delay between each data record while transmitting data back to the host.
Chapter 1
Understanding the Barcode Scanner
Enable
*Disable
*None
250 ms
500 ms
1 sec
2 sec
3 sec
5 sec
Update
29
Advertisement
Table of Contents
