Enter Configuration Mode; Exit Configuration Mode; Default Settings; Save User Settings As Defaults - CipherLab 2564MR User Manual

ENTER CONFIGURATION MODE

For the scanner to enter the configuration mode, you must have it read the "Enter Setup"
barcode, which can be located at the bottom of almost every even page of this manual.
The scanner will respond with six beeps and its LED indicator will become flashing red

after reading the barcode.
For configuring scanner parameters, see "Read a Setup Barcode" below.

EXIT CONFIGURATION MODE

For the scanner to save settings and exit the configuration mode, you must have it read the
"Update" barcode, which can be located at the bottom of almost every odd page of this
manual. If you want to exit the configuration mode without saving any changes, have the
scanner read the "Abort" barcode instead.
Just like reading the "Enter Setup" barcode, the scanner will respond with six beeps and

its LED indicator will become flashing red after reading the barcode. Wait for a few
seconds for the scanner to restart itself.

DEFAULT SETTINGS

SAVE USER SETTINGS AS DEFAULTS

Enter Setup
Update
Update
Abort
Quick Start
13