Table of Contents
Advertisement
The example below shows how to set numeric parameters:
Steps
Action
1
Power on the scanner...
2
Enter the Configuration Mode...
3
Read a Setup barcode...
For example,
Normal setup
barcode
Normal setup
barcode
Special setup
barcode
Decimal
4
Exit the Configuration Mode...
5
The scanner will automatically restart itself...
The example below shows how to set string parameters:
OR
User Feedback if Successful
The scanner will respond with a long beep
(high tone) and its LED indicator will
become solid red and go off quickly.
The scanner will respond with six beeps
(high-low tone repeats three times), and its
LED indicator will become flashing red.
The scanner will respond with two beeps
(low-high tone) if reading a normal setup
barcode.
The scanner will respond with one short
beep if reading a special setup barcode such
as "Max. Length", indicating the setup
requires reading more barcodes.
Read the "Decimal Value" barcode(s).
Refer to Appendix IV "Decimal System"
The scanner will respond with two beeps
(low-high tone) when the input values are
validated.
Same as for Enter the Configuration Mode.
Same as for Power on the scanner.
Update
Quick Start
17
Advertisement
Table of Contents
