Bt Cradle Serial Command And Equivalent Setup Barcodes - CipherLab 2564MR User Manual

Table of Contents

Advertisement

2564MR Barcode Scanner

BT CRADLE SERIAL COMMAND AND EQUIVALENT SETUP BARCODES

Config<CR>
Purpose
To configure the cradle.
Here is the setup barcode for this serial command:
Remarks
A list of the current settings will be displayed. Run HyperTerminal.exe on your
computer and change the settings one by one.
DefaultSetting<CR>
Purpose
To restore the default settings.
Here is the setup barcode for this serial command:
SingleConnection<CR>
Purpose
To allow only one scanner connecting to the cradle.
Here is the setup barcode for this serial command:
MultiConnection<CR>
Purpose
To allow up to seven scanners connecting to the cradle.
Here is the setup barcode for this serial command:
UseOnePortforAll<CR>
Purpose
To use one Virtual COM port for all whenever connecting the cradle to PC via USB. This
setting requires you to connect one cradle at a time, and will facilitate configuring a
great amount of cradles via the same Virtual COM port (for administrators' or factory
use).
Here is the setup barcode for this serial command:
UseVariablePort<CR>
256
User Guide
Config
DefaultSetting
SingleConnection
MultiConnection
UseOnePortforAll
Enter Setup

Advertisement

Table of Contents
loading

Table of Contents