Special Keyboard Feature; Keypad Support For Iphone/Ipad; Transmit Speed - CipherLab 2564MR User Manual

2564MR Barcode Scanner

2.1.7 SPECIAL KEYBOARD FEATURE

By default, this interface employs special function codes (0x01 ~ 0x1F) defined in the
Keyboard Wedge Table. However, users may want to get rid of these special codes within
the barcodes to avoid data error. You can decide whether to apply the special keyboard
feature. For further details please refer to

2.1.8 KEYPAD SUPPORT FOR IPHONE/IPAD

When the scanner has been successfully connected to iPhone or iPad for data collection, the
onscreen keypad of iPhone/iPad will disappear by default. Have the scanner read the "Show
or Hide Keypad" barcode to show or hide the keypad if necessary.
Read the "Use Trigger Key to Show or Hide Keypad" barcode in advance allowing users to
press the trigger key twice within 0.5 seconds to show or hide the onscreen keypad.
Note: This function only works for
(1) iPhone 4 and 3GS version 4.1 or later, and (2) iPad version 4.2 or later.

2.1.9 TRANSMIT SPEED

By default, the BT HID transmit speed is set to normal. Users can have the scanner work in
quicker transmit speed by reading the Fast barcode.
62
User Guide
Keyboard Wedge Table.
*Apply
Bypass
Show or Hide Keypad
*Disable
Use Trigger Key to
Show or Hide Keypad
*Normal
Enter Setup