Prefix/Suffix Code - CipherLab 2564MR User Manual

2564MR Barcode Scanner

5.3 PREFIX/SUFFIX CODE

By default, there is no prefix code, and [ENTER] or [CR] (Carriage Return) is configured to
be suffix code. Up to 8 characters can be configured, for example, "Barcode_", and you will
have the string appear in front of the barcode read, like this – "Barcode_1234567890".
If "BT HID", "USB HID" or "Keyboard Wedge" is configured for interface,

and Key Status
Status when "Normal Key" is selected for Key Type.
Key Type
Scan Code Up to 4 scan code values are allowed.
Normal Key Up to 8 character strings are allowed.
1) Read the barcode above to apply prefix code or suffix code separately, and follow steps
2~3. (Max. 8 characters each)
2) Read the "Hexadecimal
example, read "2" and "B" for the scanner to prefix or suffix the character [+].
3) Read the "Validate" barcode to complete this setting.
188
User Guide
will then become applicable. You may decide whether or not to apply Key
Value" barcode on page 264 for the desired character string. For
Key Status
N/A
 Add Shift
 Add Left Ctrl

Add Left Alt
 Add Right Ctrl
 Add Right Alt
Refer to Keyboard Wedge Table.
Configure Prefix
Configure Suffix
Enter Setup
Key Type