Entering Pin Code For Authentication; Use Preset Pin; Disable Authentication Or Use Random Pin - CipherLab 2564MR User Manual

2564MR Barcode Scanner

ENTERING PIN CODE FOR AUTHENTICATION

USE PRESET PIN

1) In the configuration mode, read the barcode below to use a preset PIN for
authentication.
2) Read one of the barcodes to specify the PIN code, in decimal or hexadecimal.
By default, the PIN code is set to "0000". Maximum 16 characters are allowed.
3) Read the "Decimal
page 264 for the desired digits or character string.
Read the "Clear PIN Code" barcode first if you need to re-input the PIN code.
4) Read the "Validate" barcode to complete this setting.

DISABLE AUTHENTICATION OR USE RANDOM PIN

In the configuration mode, read the barcode below to disable authentication (= No PIN) or
use a random PIN for authentication.
266
User Guide
Value" barcode on page 263 or the
Use Preset PIN
Enter PIN in
Hexadecimal...
Enter PIN in
Decimal...
"Hexadecimal
Clear PIN Code
*No PIN or
use random PIN
Enter Setup
Value" barcode on