Table of Contents
Advertisement
4.21.5 GS1-128 EMULATION MODE FOR UCC/EAN COMPOSITE CODES
Decide whether to transmit UCC/EAN Composite Code data as if it was encoded in GS1-128
barcodes.
4.21.6 FIELD SEPARATOR (GS CHARACTER)
Decide whether to apply a field separator (to convert the GS control character to human
readable character). The field separator is automatically added to the data when GS1
formatting is enabled.
1) Read the barcode above to specify field separator.
2) Read the
"Hexadecimal
3) Read the "Validate" barcode to complete this setting.
4.21.7 APPLICATION ID MARK
You may want to add an application ID mark (1 character long) to the left (AIMark1) or right
(AIMark2) of an application ID (AI) for the purpose of labeling it when formatting the GS1
data. The application ID mark is automatically added to the data when GS1 formatting is
enabled.
1) Read the barcode above to add a mark to the left (AIMark1)/right (AIMark2) of an
application ID.
Value" barcode on page 264 for the desired character string.
Chapter 4
Changing Symbology Settings
Enable GS1-128
Emulation Mode
*Disable
Specify Field
Separator...
AIMark1
AIMark2
Update
161
Advertisement
Table of Contents
