CipherLab 2564MR User Manual page 57

Chapter 1 Understanding the Barcode Scanner
The scanner is capable of decoding a mix of UPC/EAN barcodes with and without addons.
The read redundancy (2~16 times; default is set to 10) allows changing the number of
times to decode a UPC/EAN barcode before transmission. The more redundancy you select,
the higher the reading security is, and thus, the slower the reading speed becomes. You will
have to compromise between reading security and decoding speed.
Note: UPC/EAN Addon 2 and Addon 5 must be enabled individually for this setting to take
effect.
Addon Security Level
(2~16; default:10)
1) Read the barcode above to specify the read redundancy for UPC/EAN barcodes.
2) Read the "Decimal Value" barcode on page 263. For example, read "1" and "2" for the
scanner to re-read the barcode for 12 times.
3) Read the "Validate" barcode on the same page to complete this setting.
45
Update