Figure 9-2: Do160 Main Menus; Figure 9-3: Normal State Screens - Ametek California Instruments MX15 Series User Manual

Prior to executing a test, selection of the desired test standard and group is required. Use the
shuttle to select the standard and the group if applicable.
9.3.1.5 Normal State tests
Scroll to the NORMAL STATE entry using the up and down cursor keys. Press the ENTER key
to select the NORMAL STATE screens. The screen will appear as shown in Figure 9-3.
The DO160 NORMAL screens have the following tests:
1
2
3
4
5
6
7
8
9

Figure 9-2: DO160 Main Menus

Figure 9-3: Normal state screens

V OLT FREQ M IN
V OLT FREQ M A X
V OLT UNBA LANCE
W A V EFORM DISTORTION
V OLT M ODULA TION
FREQ M ODULA TION
POW ER INTERRUPT
V OLTA GE SURGE
FREQ TRANSIENT (group 1/A (CF))
FREQ V A RIA TION (group 2 & 3/A (NF) & A (W F))
136