nord NORDAC FLEX SK 200E Series User Manual page 72

NORDAC FLEX (SK 200E ... SK 235E) – Users Manual for Frequency Inverters
Pos : 165.17 /Anl eitungen/Elektronik/FU und Starter/2. Montage und Installati on/El ektrisc her Ansc hlus s/SK 1xx E, SK 2xxE, SK 5xx P, SK xx xE-FD S/Steuerteil/D etails Steueransc hlüsse (Sammlung)/Details Steueransc hl üss e_10_ASI [SK 2x xE] @ 7\m od_1435563787234_14638.doc x @ 229491 @ @ 1
AS interface
84 ASI+
85 ASI-
Pos : 165.18 /Anl eitungen/Elektronik/FU und Starter/2. Montage und Installati on/El ektrisc her Ansc hlus s/SK 1xx E, SK 2xxE, SK 5xx P, SK xx xE-FD S/Steuerteil/D etails Steueransc hlüsse (Sammlung)/Details Steueransc hl üss e_11_SH [SK 2x xE] @ 7\mod_1435563767199_14638.docx @ 229427 @ @ 1
Functional Safety
"Safe Stop"
89 VI/24V SS
88 VI/0V SS
Pos : 165.19 /Anl eitungen/Elektronik/FU und Starter/2. Montage und Installati on/El ektrisc her Ansc hlus s/SK 1xx E, SK 2xxE, SK 5xx P, SK xx xE-FD S/Steuerteil/D etails Steueransc hlüsse (Sammlung)/Details Steueransc hl üss e_12_RJ 12 [SK 1x 0E, SK 2x xE, SK x xxE-FD S] @ 7\m od_1435565668231_14638.docx @ 229683 @ @ 1
Communication
interface
1 RS485 A+
2 RS485 B-
3 GND
4 RS232 TXD
5 RS232 RXD
6 +24 V
Pos : 165.20 /Anl eitungen/Elektronik/FU und Starter/2. Montage und Installati on/El ektrisc her Ansc hlus s/SK 1xx E, SK 2xxE, SK 5xx P, SK xx xE-FD S/Steuerteil/D etails Steueransc hlüsse (Sammlung)/Details Steueransc hl üss e_12_RJ 12_Ergänzung [SK 1xx E, SK 2xx E, SK xxx E-F DS] @ 20\mod_1516606174814_14638.docx @ 2384099 @ @ 1
Connection cables
(accessories/optional)
Pos : 166 /Allgem ein/Allgem eingültig e Module/---------Seitenumbr uc h k ompakt --------- @ 13\m od_1476369695906_0.doc x @ 2265496 @ @ 1
72
Control of device via the simple field bus level: Actuator/sensor interface
26.5 – 31.6 V
SK 220E and SK 230E: ≤ 25 mA
SK 225E and SK 235E: ≤ 290 mA, of
which a maximum of 60 mA required to
supply external actuators
ASI+
ASI-
Fail-safe input
Details: BU0230, Technical Data
24 V input
Reference potential
Device connected to different communication tools
24 VDC ± 20%
Data cable RS485
Data cable RS485
Bus signal reference potential
Data cable RS232
Data cable RS232
Voltage output
Connection of the device to an MS Windows® PC with NORDCON software
Length: approx. 3.0 m + approx. 0.5 m
Part number: 275274604
Suitable for connection to a USB port in a
PC or alternatively, to a SUB D9
connection.
TI 275274604
Details:
Only usable for yellow AS interface line, feed via black cable
not possible.
Configuration via DIP switches S1:4 and 5
P480 ... -
P483 -
The input is always active. Supply this input with the required
voltage in order to make the device ready for operation.
- -
- -
RS 485 (to connect a parameterization unit)
9600 ... 38400 Baud
Terminating resistor (1 kΩ) fixed
RS 232 (to connect a PC (NORD CON))
9600 ... 38400 Baud
P502...
P513 [-02]
1 - 2 - 3 - 4 - 5 - 6
BU 0200 en-US-4920