Overview - nord NORDAC FLEX SK 200E Series User Manual

Table of Contents

Advertisement

Pos : 24 /Anl eitungen/Elek tronik/FU und Starter/1. Allgemei nes/Ü ber blick - 1- [SK 2xx E] @ 1\m od_1341394802524_14638.docx @ 29128 @ 2555 @ 1

1.1 Overview

This manual describes two very similar basic versions of the SK 200E product family (NORDAC FLEX).
Wherever the SK 2xxE is mentioned below, this refers to information that applies to all devices in this
family.
If the information applies exclusively to versions SK 205E/SK 215E/SK 225E/SK 235E, this is
apparent from the designation SK 2x5E.
If the information only applies to versions SK 200E/SK 210E/SK 220E/SK 230E, this is recognizable
from the designation SK 2x0E.
Basic properties
High starting torque and precise motor speed control setting by means of sensorless current vector
control
Can be installed directly on, or close to the motor.
Permissible ambient temperature -25°C to 50°C (please refer to the technical data)
Integrated EMC line filter for limit curve class A/category C2 or C3 (not with 115 V devices)
Automatic measurement of the stator resistance and determination of precise motor data
Programmable direct current braking
Built-in brake chopper for 4-quadrant operation, optional braking resistors (internal/external)
Separate temperature sensor input (TF+/TF-)
Evaluation of an incremental encoder via digital inputs possible
NORD system bus for linking modular additional modules
Four separate parameter sets that can be changed over online
8x DIP switches for minimal configuration
LEDs for diagnosis (SK 2x5E incl. DI/DO signal statuses)
RS232/485 interface via RJ12 plug
Plug-in data memory (EEPROM)
Integrated "POSICON" positioning control (
CANopen absolute value encoder evaluation via the NORD system bus
Operation of three-phase current asynchronous motors (ASM) and Permanent-Magnet
Synchronous Motors (PMSM)
Integrated PLC (
BU
Differences between the individual versions (SK 200E/SK 205E/... SK 235E) are summarized in the
following table and will be described in this manual.
BU 0200 en-US-4920
0550)
BU
0210)
1 General
13

Advertisement

Table of Contents
loading

Table of Contents