nord NORDAC FLEX SK 200E Series User Manual page 212

NORDAC FLEX (SK 200E ... SK 235E) – Users Manual for Frequency Inverters
SK 2xxE
[-08] =
[-09] =
Pos : 581 /Anleitungen/El ektr onik /FU und Starter/5. Par ameter/Par ameter auflistung (P000 ...)/P700- P799/Param eter P710 – Spannung Analog ausg ang [SK 1x0E, SK 2xx E, SK 2x xE-FD S] @ 2\m od_1346932205766_14638.docx @ 43532 @ @ 1
P710 Analog output volta.
[-01]
(analog output voltage)
[-02]
0.0 ... 10.0 V Displays the delivered value of analog output.
[-01] =
[-02] =
Pos : 582 /Allgem ein/Allgem eingültig e Module/---------Seitenumbr uc h k ompakt --------- @ 13\m od_1476369695906_0.doc x @ 2265496 @ @ 1
Pos : 583 /Anleitungen/El ektr onik /FU und Starter/5. Par ameter/Par ameter auflistung (P000 ...)/P700- P799/Param eter P711 – Zustand Digital e Ausgäng e [SK 2xxE, SK 2xx E-FDS] @ 2\mod_1346932206390_14638.doc x @ 43556 @ @ 1
State of relays
P711
(state of digital outputs)
00000 ... 11111 Indicates the actual status of the digital outputs of the variable frequency drive.
(bin)
or
Bit 0 = Digital output 1
00 ... FF Bit 1 = Mechanical brake
(hex)
Bit 2 = Digital output 2
Bit 3 = reserved
Pos : 584 /Anleitungen/El ektr onik /FU und Starter/5. Par ameter/Par ameter auflistung (P000 ...)/P700- P799/Param eter P711 – Zustand Digital e Ausgäng e_T eil2/2 [SK 1x 0E, SK 2x xE, SK 2xx E-FDS] @ 9\m od_1448448278913_14638.docx @ 266831 @ @ 1
Minimum value
Maximum value
Simple Box: The binary bits are converted to a hexadecimal value and displayed.
Parameter Box: The bits are displayed increasing from right to left (binary).
Pos : 585 /Anleitungen/El ektr onik /FU und Starter/5. Par ameter/Par ameter auflistung (P000 ...)/P700- P799/Param eter P714 – Betriebs dauer @ 0\mod_1328172684685_14638.docx @ 15118 @ @ 1
Operating time
P714
(operating time )
0.10 ... ___ h This parameter shows the time for which the VFD was connected to the line voltage and was
ready for operation.
Pos : 586 /Anleitungen/El ektr onik /FU und Starter/5. Par ameter/Par ameter auflistung (P000 ...)/P700- P799/Param eter P715 – Freigabedauer @ 0\m od_1328172731474_14638.docx @ 15119 @ @ 1
Running time
P715
(enable period)
0.00 ... ___ h This parameter shows the time for which the VFD was enabled and supplied current to the output.
Pos : 587 /Anleitungen/El ektr onik /FU und Starter/5. Par ameter/Par ameter auflistung (P000 ...)/P700- P799/Param eter P716 – Ak tuelle Frequenz @ 0\mod_1328172775215_14638.docx @ 15120 @ @ 1
Current frequency
P716
(present frequency)
-400.0 ... 400.0 Hz Displays the present output frequency.
Pos : 588 /Anleitungen/El ektr onik /FU und Starter/5. Par ameter/Par ameter auflistung (P000 ...)/P700- P799/Param eter P717 – Ak tuelle Drehz ahl @ 0\m od_1328172889966_14638.docx @ 15121 @ @ 1
Current speed
P717
(present speed)
-9999 ... 9999 rpm Displays the present motor speed calculated by the VFD.
Pos : 589 /Anleitungen/El ektr onik /FU und Starter/5. Par ameter/Par ameter auflistung (P000 ...)/P700- P799/Param eter P718 – Ak tuelle Sollfreq uenz @ 0\m od_1328172931732_14638.docx @ 15122 @ @ 1
212
Ext. Al 1 2. IOE, "External analog input 1 2nd IOE", AIN1 of the second I/O extension
(SK xU4-IOE) (= analog input 3)
Ext. Al 2 2. IOE, "External analog input 2 2nd IOE", AIN2 of the second I/O extension
(SK xU4-IOE) (= analog input 4)
IOE-1, AOUT of the first I/O extension (SK xU4-IOE)
IOE-2, AOUT of the second I/O extension (SK xU4-IOE)
Bits 7-4
0000
1111
Bit 4 = Digital output 1, IO extension 1
Bit 5 = Digital output 2, IO extension 1
Bit 6 = Digital output 1, IO extension 2
Bit 7 = Digital output 2, IO extension 2
Bits 3-0
0000
0 0
1111
F F
Binary
hex
Binary
hex
BU 0200 en-US-4920