nord NORDAC FLEX SK 200E Series User Manual page 210

NORDAC FLEX (SK 200E ... SK 235E) – Users Manual for Frequency Inverters
Pos : 571 /Anleitungen/El ektr onik /FU und Starter/5. Par ameter/Par ameter auflistung (P000 ...)/P700- P799/Param eter P703 – Strom l etz te Störung 1...5 @ 0\m od_1328170627489_14638.docx @ 15106 @ @ 1
P703
[-01]
Current. Last error
...
(last current fault 1...5)
[-05]
0.0 ... 999.9 A This parameter stores the output current that was being delivered at the time the fault occurred.
The values of the last 5 errors are stored.
The Simple Box/Control Box must be used to select the corresponding memory location 1...5-
(array parameter), and confirmed using the OK/ENTER key to read the stored value.
Pos : 572 /Anleitungen/El ektr onik /FU und Starter/5. Par ameter/Par ameter auflistung (P000 ...)/P700- P799/Param eter P704 – Spannung letzte Störung 1...5 @ 0\m od_1328170671391_14638.docx @ 15107 @ @ 1
P704
[-01]
Voltage last error
...
(last voltage error 1...5)
[-05]
0 ... 600 V AC This parameter stores the output voltage that was being delivered at the time the fault occurred.
The values of the last 5 errors are stored.
The Simple Box/Control Box must be used to select the corresponding memory location 1...5-
(array parameter), and confirmed using the OK/ENTER key to read the stored value.
Pos : 573 /Anleitungen/El ektr onik /FU und Starter/5. Par ameter/Par ameter auflistung (P000 ...)/P700- P799/Param eter P705 – Zwisc henkreis spannung l etz te Stör ung 1...5 @ 0\m od_1328170720639_14638.docx @ 15108 @ @ 1
P705
[-01]
Dc. Ink volt. Last error
...
(last DC link voltage fault 1...5)
[-05]
0 ... 1000 V DC This parameter stores the DC link voltage that was being delivered at the time the fault occurred.
The values of the last 5 errors are stored.
The Simple Box/Control Box must be used to select the corresponding memory location 1...5-
(array parameter), and confirmed using the OK/ENTER key to read the stored value.
Pos : 574 /Anleitungen/El ektr onik /FU und Starter/5. Par ameter/Par ameter auflistung (P000 ...)/P700- P799/Param eter P706 – Param etersatz l etzte Störung 1...5 @ 0\m od_1328170810570_14638.docx @ 15109 @ @ 1
P706
[-01]
P set last error
...
(parameter set, last fault 1... 5)
[-05]
0 ... 3 This parameter stores the parameter set code that was active when the error occurred. Data for
the previous 5 faults are stored.
The Simple Box/Control Box must be used to select the corresponding memory location 1...5-
(array parameter), and confirmed using the OK/ENTER key to read the stored error code.
Pos : 575 /Anleitungen/El ektr onik /FU und Starter/5. Par ameter/Par ameter auflistung (P000 ...)/P700- P799/Param eter P707 – Softwar e-Version/-Revision @ 0\mod_1328171743458_14638.doc x @ 15110 @ @ 1
P707
[-01]
Software-Version
...
(Software version/revision)
[-03]
0.0 ... 9999.9 This parameter shows the software and revision
numbers in the VFD. This can be significant
when different VFDs are assigned the same
settings.
Array 03 provides information about any special
versions of the hardware or software. A zero
stands for the standard version.
Pos : 576 /Allgem ein/Allgem eingültig e Module/---------Seitenumbr uc h k ompakt --------- @ 13\m od_1476369695906_0.doc x @ 2265496 @ @ 1
210
S
S
S
S
... [-01] = version number (Vx.x)
... [-02] = revision number (Rx)
... [-03] = special version of hardware/software
(0.0)
BU 0200 en-US-4920