nord NORDAC FLEX SK 200E Series User Manual page 19

Pos : 34.9 /Anl eitungen/Elek tronik/FU und Starter/1. Allgemei nes/Liefer umfang/Lieferum fang Z ubehör _07_Wandm ontag e [BU 0135, 0180, 0200] @ 59\m od_1606904626795_14638.docx @ 2702467 @ @ 1
Wall mounting kit for the device
Wall mounting kit for SK TU4-...
modules
Pos : 34.10 /Anleitungen/El ektr onik /FU und Starter/1. Allgemei nes /Li eferumfang/Li eferumfang Zubehör_08_Sc halter und Potis [BU 0180, 0200] @ 6\m od_1430916492063_14638.docx @ 216023 @ @ 1
Switch/potentiometer unit
(L – OFF – R/0 – 10 V)
ATEX potentiometer
(0 – 10 V)
Potentiometer
(0 – 10 V)
Switch
(L – OFF – R)
Maintenance switch
(0 – I)
Setpoint adjuster
(L – 0 – R/0 – 100 %)
Pos : 34.11 /Allgem ein/Allgemei ngültig e Module/---------Seitenumbr uc h k ompakt --------- @ 13\m od_1476369695906_0.doc x @ 2265496 @ @ 1
BU 0200 en-US-4920
Set for mounting the device, separate from the
motor (e.g. to a wall).
Model SK TIE4-WMK-...
( Section 2.1.3 "Wall mounting")
Set for mounting a technology unit, SK TU4-...,
separate from the device (e.g. to a wall).
Model SK TIE4-WMK-TU
( Section 3.2.2 "External technology units
SK TU4-... (module attachment)")
Customer unit attached to the device for ease of
control of the device using 3-position switch and
potentiometers
Model SK CU4-POT
( Section 3.2.1 "Internal customer units
SK CU4-... (installation of modules)")
Potentiometer with ATEX capability attached to
the device for ease of control of the device
Model SK ATX-POT
( Section 3.2.1 "Internal customer units
SK CU4-... (installation of modules)")
Potentiometer attached to the device for ease of
control of the device
Model SK TIE4-POT
( Section 3.2.1 "Internal customer units
SK CU4-... (installation of modules)")
3-position switch attached to the device for ease
of control of the device
Model SK TIE4-SWT
( Section 3.2.2 "External technology units
SK TU4-... (module attachment)")
Technology unit attached to the device or
alternatively for wall mounting (wall mounting kit
required) for the safe insulation of the device
from the AC power supply.
Model SK TU4-MSW- ...
( Section 3.2.2 "External technology units
SK TU4-... (module attachment)")
Technology unit attached to the device or
alternatively for wall mounting (wall mounting kit
required) for ease of control of the device using
buttons and potentiometers, including power
supply unit to generate a 24 VDC control power
supply.
Model SK TU4-POT- ...
( Section 3.2.2 "External technology units
SK TU4-... (module attachment)")
1 General
19