Version list Title, Order number Device Remarks software Date version BU 0200, 6072003 / 1216 V 2.1 R0 Among other things March 2016 • General corrections • Structural adjustments to document • Removal of various descriptions for accessories (reference to additional documents Technical Information) •...
Page 4
Pos : 8 /Allgemei n/Allgemei ngültige Modul e/H erausgeber (2021- 02- 16 15:15:31) @ 0\mod_1325779078002_14638.doc x @ 14805 @ @ 1 Publisher Getriebebau NORD GmbH & Co. KG Getriebebau-Nord-Strasse 1 • 22941 Bargteheide, Germany • http://www.nord.com/ Tel. +49 (4532) 2890 • Fax +49 (4532) 289-2253 Member of the NORD DRIVESYSTEMS Group === Ende der Liste für T extm arke Copyright ===...
NORDAC FLEX (SK 200E ... SK 235E) – Users Manual for Frequency Inverters Pos : 10 /Allgem ein/Steuermodul e/Inhaltsverz eic hnis @ 0\m od_1317978518480_14638.docx @ 14771 @ @ 1 Table of Contents === Ende der Liste für T extm arke Inhaltsv erz eichnis === General ...............................
Page 7
Table of Contents Display, operation and options ........................ 86 Control and parameterization options ....................87 3.1.1 Use of control and parameterization units ................88 3.1.2 Connection of multiple devices to one parameterization tool ..........89 Optional modules ..........................90 3.2.1 Internal customer units SK CU4-…...
Page 8
NORDAC FLEX (SK 200E ... SK 235E) – Users Manual for Frequency Inverters 7.2.1 Electrical data 1~115 V ..................... 238 7.2.2 Electrical data 1~230 V ..................... 239 7.2.3 Electrical data 3~230 V ..................... 240 7.2.4 Electrical data 3~400 V ..................... 243 Additional information ..........................
Page 9
List of illustrations Pos : 12 /Allgem ein/Steuermodul e/Abbildungsv erz eichnis @ 0\m od_1317978515699_14638.docx @ 14764 @ @ 1 List of illustrations === Ende der Liste für T extm arke Abbildungsv erzeic hnis === Figure 1: Device with internal SK CU4-......................... 15 Figure 2: Device with external SK CU4-...
Page 10
NORDAC FLEX (SK 200E ... SK 235E) – Users Manual for Frequency Inverters Pos : 14 /Allgem ein/Steuermodul e/T abellenv erzeic hnis @ 0\mod_1317978519199_14638.doc x @ 14773 @ @ 1 List of tables === Ende der Liste für T extm arke Tabellenverz eic hnis === Table 1: Version List BU0200 ..........................
Pos : 18 /Anl eitungen/Elek tronik/FU und Starter/1. Allgemei nes/Allgemei nes _Inhal t [SK 1x 0E, SK 2x xE, SK 5xx E, SK 2xxE-FD S, SK 5xxP] @ 28\m od_1551446416293_14638.docx @ 2494170 @ @ 1 The SK 2xxE series is based on the tried and tested NORD platform. The devices are characterized by their compact design and optimum control characteristics, and have uniform parameterization.
Page 12
NORDAC FLEX (SK 200E ... SK 235E) – Users Manual for Frequency Inverters Pos : 22 /Anl eitungen/Elek tronik/FU und Starter/1. Allgemei nes/Allgemei nes _Inhal t_Ergänzung 3_dez entral [SK 2xx E] @ 6\m od_1429695846701_14638.docx @ 212611 @ @ 1 Up to firmware version 1.4 R1 data was backed up in the pluggable EEPROM. The EEPROM then had to remain plugged in during operation.
• Plug-in data memory (EEPROM) • Integrated "POSICON" positioning control ( 0210) • CANopen absolute value encoder evaluation via the NORD system bus Operation of three-phase current asynchronous motors (ASM) and Permanent-Magnet • Synchronous Motors (PMSM) • Integrated PLC (...
NORDAC FLEX (SK 200E ... SK 235E) – Users Manual for Frequency Inverters Additional characteristics, sizes 1 ... 3 Feature 200E 205E 210E 215E 220E 225E 230E 235E Integrated 24 V power supply unit Optionally available 24 V power supply unit Number of digital inputs (DIN) Number of digital outputs (DO) Number of analog inputs (AIN)
1 General Pos : 26 /Anl eitungen/Elek tronik/FU und Starter/1. Allgemei nes/Optionsbaugruppen [BU0135, BU 0180, BU 0200] @ 1\mod_1342688473060_14638.docx @ 35111 @ 5 @ 1 Optional modules Optional modules are used to extend the functionality of the device. These options are available as an installation variant, the so-called SK CU4-… customer unit, and also as an attachment variant, the so-called SK TU4-…...
NORDAC FLEX (SK 200E ... SK 235E) – Users Manual for Frequency Inverters Pos : 28 /Anl eitungen/Elek tronik/FU und Starter/1. Allgemei nes/Optionsbaugruppen_Erg änz ung FU [BU 0180, BU0200] @ 6\mod_1430905865662_14638.docx @ 215533 @ @ 1 The SK CU4-POT potentiometer adapter is an exception among the SK CU4 Modules since it is not integrated in the device but attached to it.
IP55 version of device (optionally IP66) • Operating instructions as PDF file on CD ROM including NORD CON, (PC parameterization software) Pos : 34.1 /Anl eitungen/Elek tronik/FU und Starter/1. Allgemei nes/Liefer umfang/Lieferum fang Z ubehör [SK 1xx E, SK 2x xE] @ 6\mod_1430913739531_14638.docx @ 215565 @ @ 1...
Page 18
NORDAC FLEX (SK 200E ... SK 235E) – Users Manual for Frequency Inverters Pos : 34.5 /Anl eitungen/Elek tronik/FU und Starter/1. Allgemei nes/Liefer umfang/Lieferum fang Z ubehör _03_Br emswiderstände [BU 0180, 0200] @ 6\m od_1430914476094_14638.docx @ 215703 @ @ 1 Braking resistor installed in the device to divert Internal braking resistors regenerative energy from the drive system...
Page 19
1 General Pos : 34.9 /Anl eitungen/Elek tronik/FU und Starter/1. Allgemei nes/Liefer umfang/Lieferum fang Z ubehör _07_Wandm ontag e [BU 0135, 0180, 0200] @ 59\m od_1606904626795_14638.docx @ 2702467 @ @ 1 Set for mounting the device, separate from the Wall mounting kit for the device motor (e.g.
Page 20
NORDAC FLEX (SK 200E ... SK 235E) – Users Manual for Frequency Inverters Pos : 34.12 /Anleitungen/El ektr onik /FU und Starter/1. Allgemei nes /Li eferumfang/Li eferumfang Zubehör_09_Steckv erbi nder [BU 0135, 0180, 0200] @ 6\mod_1430917266662_14638.docx @ 216087 @ @ 1 AC power connector attaching to the device to Power connection establish a detachable connection for supply...
Page 21
Refer to ePlan Device master data/device description files for Device master data NORD field bus options NORD field bus files Standard modules for NORD variable frequency S7 standard modules for drives PROFIBUS DP and www.nord.com PROFINET IO Refer to...
NORDAC FLEX (SK 200E ... SK 235E) – Users Manual for Frequency Inverters Pos : 36.1 /Anl eitungen/Elek tronik/FU und Starter/1. Allgemei nes/Sicherheits- und Installati onshi nweis e und Warn- Gefahr enhinw eis e/neu/Sicher heits- , Installations- und Anw endungshi nweis e_01 [alle Geräte - für Handbuecher BU..] @ 17\mod_1488973491253_14638.doc x @ 2333806 @ 2 @ 1 1.4 Safety, installation and application information Pos : 36.2 /Anl eitungen/Elek tronik/FU und Starter/1.
Page 23
1 General Furthermore, the device and the associated accessories may only be installed and started up by qualified electricians. Electricians are persons who, because of their technical training and experience, have sufficient knowledge with regard to • Switching on, switching off, isolating, grounding and marking power circuits and devices, •...
Page 24
NORDAC FLEX (SK 200E ... SK 235E) – Users Manual for Frequency Inverters Installation, maintenance and repair work must not be carried out unless the device has been de- energized and at least 5 minutes have elapsed since line power has been disconnected! (Due to charged capacitors, the device may continue to carry hazardous voltages for up to 5 minutes after line power has been disconnected).
Page 25
(ATEX zone 22 3D, EAC Ex) must be used. • Repairs may only be carried out by Getriebebau NORD GmbH & Co. KG. Pos : 37 /Allgem ein/Allgem eing ültige M odul e/---------Seitenum bruc h k om pak t --------- @ 13\mod_1476369695906_0.docx @ 2265496 @ @ 1...
NORDAC FLEX (SK 200E ... SK 235E) – Users Manual for Frequency Inverters Pos : 38 /Anl eitungen/Elek tronik/FU und Starter/1. Allgemei nes/Sicherheits- und Installati onshi nweis e und War n- Gefahr enhinw eis e/neu/W arn- und Gefahr enhinw eis e_01 [alle Geräte] @ 12\m od_1466692721681_14638.docx @ 332655 @ 2 @ 1 1.5 Warnings and hazard information Pos : 39 /Anl eitungen/Elek tronik/FU und Starter/1.
1 General Pos : 42 /Anl eitungen/Elek tronik/FU und Starter/1. Allgemei nes/Sicherheits- und Installati onshi nweis e und War n- Gefahr enhinw eis e/neu/W arn- und Gefahr enhinw eis e im D ok ument [all e Ger äte] - auslaufend @ 12\mod_1466693938641_14638.doc x @ 332758 @ 3 @ 1 1.5.2 Warnings and hazard information in the document The warnings and hazard information in this document are located at the beginning of the section which describes the actions which may result in the corresponding hazards.
NORDAC FLEX (SK 200E ... SK 235E) – Users Manual for Frequency Inverters Devices which are configured and approved for use in explosion hazard areas ( Section 2.6 "Operation in potentially explosive environments "), comply with the following directives or standards. Applicable Approval Directive...
1 General Pos : 47 /Anl eitungen/Elek tronik/FU und Starter/1. Allgemei nes/Z ulas sungen/U L und C SA Zul ass ung_T eil 1 [allgem ei n] @ 7\mod_1432204309954_14638.docx @ 221459 @ 3 @ 1 1.6.1 UL and CSA approval File No. E171342 The categorization of protective devices approved by the UL according to United States Standards for the devices described in this manual is listed below with essentially the original wording.
Page 30
NORDAC FLEX (SK 200E ... SK 235E) – Users Manual for Frequency Inverters Information Internal Break Resistors (PTCs) Alternate - internal brake resistors, optional for drives marked for USL only (not for Canada), Unlisted Component NMTR3, manufactured by Getriebebau: Usage Cat.
Page 31
1 General Size valid description 1 - 3 For 240 V for 1 “Suitable For Use On A Circuit Capable Of Delivering Not More Than 65 000 rms Symmetrical phase models or Amperes, ____ Volt maximum”, 500V for 3 “When Protected by Circuit Breaker (inverse time trip type) in accordance with UL 489, rated phase models ______ Amperes, and _______Volts”, as listed in only:...
NORDAC FLEX (SK 200E ... SK 235E) – Users Manual for Frequency Inverters Pos : 52 /Anl eitungen/Elek tronik/FU und Starter/1. Allgemei nes/Ty pens chl üss el/Ty pensc hlüssel /N omenklatur [SK 1xx E, SK 2xxE, SK 5xx E/P] @ 7\m od_1434023855039_14638.docx @ 224147 @ 2 @ 1 1.7 Model code/nomenclature Unique model codes have been defined for the individual modules and devices.
NORDAC FLEX (SK 200E ... SK 235E) – Users Manual for Frequency Inverters Size 4 SK TI4-4-200-340 (-C) IP rating: Standard = IP55, C = “coated” = IP66 Power connection: 230 = 3~ 230 V, 340 = 3~ 400 V Suitable device models: 200 = SK 200E, 210 = SK 210E, 220 = SK 220E, 230 = SK 230E...
1 General 1.7.5 Model code, connection unit for technology unit SK TI4-TU-BUS (-C) IP rating: Standard = IP55 C = "coated" IP66 Suitable NET = grid optional module (e.g. TU4-24V-…) device optional bus module (e.g. CANopen: model: TU4-CAO Group: TU = technology unit SK TI4 = connection unit SK TI4 Device series: (...) Options, only implemented if required.
NORDAC FLEX (SK 200E ... SK 235E) – Users Manual for Frequency Inverters Pos : 64 /Anl eitungen/Elek tronik/FU und Starter/1. Allgemei nes/Leis tung- Baugrößen- Z uor dnung [SK 2xx E] @ 59\mod_1606906010949_14638.docx @ 2702589 @ 2 @ 1 1.8 Output/size assignment AC power supply assignment SK 2xxE Size 1~ 110 - 120 V...
Page 37
If the variable frequency drive needs to be retrofitted, i.e. the drive unit (inverter pre-attached to motor) is not entirely purchased from NORD, the diaphragm valve is supplied in the accessories kit with the variable frequency drive. The valve must be professionally installed on site by the system installer (note: the valve must be installed in a location that is as high as possible in order to avoid contact with accumulated moisture, e.g.
Information Device version IP6x IP6x-compliant devices must be installed by NORD since special measures have to be taken. IP6x components that are retrofitted on site cannot guarantee this degree of protection. Pos : 72 /Anl eitungen/Elek tronik/FU und Starter/2. M ontage und Ins tall ati on/M ontage/M otormontage - Standard [SK 1xx E, SK 2xxE]/M ontage "Gerät"_Ergänzung 1 [SK 2xx E] @ 7\m od_1434102314079_14638.docx @ 224573 @ @ 1 The SK 2xxE is connected to the motor or the wall mounting kit using the size that is suitable for the SK TI4-…...
Page 39
2 Mounting and installation Information Output derating The devices require sufficient ventilation to protect against overheating. Failure to do so will result in a derating of the variable frequency drive. Ventilation is affected by the type of installation (motor mounting, wall mounting) or, with motor mounting, the air flow of the motor fan (continuous slow speed ...
NORDAC FLEX (SK 200E ... SK 235E) – Users Manual for Frequency Inverters Pos : 75 /Anl eitungen/Elek tronik/FU und Starter/2. M ontage und Ins tall ati on/M ontage/M otormontage - Standard [SK 1xx E, SK 2xxE]/M ontage Is olier platte – Baugr öße 4 [SK 2xx E] @ 10\mod_1456819981747_14638.doc x @ 310877 @ 35 @ 1 2.1.1 Installation of insulating plate –...
Pos : 77 /Anl eitungen/Elek tronik/FU und Starter/2. M ontage und Ins tall ati on/M ontage/M otormontage - Standard [SK 1xx E, SK 2xxE]/Arbeitsgänge für di e M otorm ontag e [SK 2xxE] @ 1\mod_1341488911979_14638.docx @ 29976 @ 3 @ 1 2.1.2 Motor installation steps If necessary, remove the original terminal box from the NORD motor so that only the base of the terminal box and the motor terminal block remain.
Pos : 80 /Anl eitungen/Elek tronik/FU und Starter/2. M ontage und Ins tall ati on/M ontage/M otormontage - Standard [SK 1xx E, SK 2xxE]/Anpassung an di e M otorbaugröß e_Adapter [SK 2xx E] @ 7\m od_1434357316607_14638.docx @ 224946 @ 5 @ 1 Connection unit SK TI4 Adapter plate Gasket Motor, size 71 Figure 6: Example of motor size adaptation NORD motor Add-on Add-on Add-on Add-on sizes...
2 Mounting and installation Pos : 82 /Anl eitungen/Elek tronik/FU und Starter/2. M ontage und Ins tall ati on/M ontage/M otormontage - Standard [SK 1xx E, SK 2xxE]/Abm ess ung en auf Motor [SK 2xxE] @ 1\mod_1342515376017_14638.doc x @ 32843 @ 4 @ 1 2.1.2.2 Dimensions, SK 2xxE mounted on motor Size...
NORDAC FLEX (SK 200E ... SK 235E) – Users Manual for Frequency Inverters Pos : 84 /Anl eitungen/Elek tronik/FU und Starter/2. M ontage und Ins tall ati on/M ontage/W andm ontage - Ergänz ung [SK 1xx E, SK 2xxE]/Wandmontage [SK 1xx E, SK 2xxE] @ 1\mod_1341496591999_14638.doc x @ 30084 @ 3 @ 1 2.1.3 Wall mounting As an alternative to motor mounting, the device can also be installed close to the motor using an optional wall mounting kit.
2 Mounting and installation Figure 8: SK TIE4-WMK-1-K (or. -2-K) Figure 9: SK TIE4-WMK-3 Pos : 87 /Anl eitungen/Elek tronik/FU und Starter/2. M ontage und Ins tall ati on/M ontage/W andm ontage - Ergänz ung [SK 1xx E, SK 2xxE]/Wandmontageki t SK T IE4 WM K-1-EX und - 2-EX [SK 2xxE] @ 22\m od_1529334914872_14638.docx @ 2427361 @ 5 @ 1 Wall mounting kit SK TIE4-WMK-…...
NORDAC FLEX (SK 200E ... SK 235E) – Users Manual for Frequency Inverters Adapter plate Figure 10: SK 2xxE with wall mounting kit Figure 11: SK TIE4-WMK… (…1-EX / 2-EX) Pos : 88 /Anl eitungen/Elek tronik/FU und Starter/2. M ontage und Ins tall ati on/M ontage/W andm ontage - Ergänz ung [SK 1xx E, SK 2xxE]/Wandmontageki t mit Lüfter [2xx E] @ 22\mod_1529335270650_14638.doc x @ 2427436 @ 4 @ 1 2.1.3.2 Wall mounting kit with fan Pos : 89 /Anl eitungen/Elek tronik/FU und Starter/2.
NORDAC FLEX (SK 200E ... SK 235E) – Users Manual for Frequency Inverters Pos : 91 /Anl eitungen/Elek tronik/FU und Starter/2. M ontage und Ins tall ati on/M ontage/W andm ontage - Ergänz ung [SK 1xx E, SK 2xxE]/Einbaulag en FU mit W andm ontag ekit [SK 2xx E] @ 1\m od_1341497232259_14638.docx @ 30156 @ 4 @ 1 2.1.3.3 Variable Frequency Drive mounting positions with wall mounting kit Installation of the variable frequency drive close to the motor is permissible in the following mounting...
2 Mounting and installation Pos : 93 /Anl eitungen/Elek tronik/FU und Starter/2. M ontage und Ins tall ati on/M ontage/M otormontage - Standard [SK 1xx E, SK 2xxE]/M ontage Opti ons baugruppen [SK 1xx E / SK 2xxE] @ 1\mod_1342690542275_14638.docx @ 35192 @ 2 @ 1 2.2 Installation of optional modules Modules must not be inserted or removed unless the device is de-energized.
Page 50
NORDAC FLEX (SK 200E ... SK 235E) – Users Manual for Frequency Inverters mounting location for M12 sockets or connectors should be 4L or 4R. An additional M32 hole (optional slot 9) is provided for the power supply connection of size 4. Optional slot Position Meaning...
2 Mounting and installation Pos : 96 /Anl eitungen/Elek tronik/FU und Starter/2. M ontage und Ins tall ati on/M ontage/M otormontage - Standard [SK 1xx E, SK 2xxE]/M ontage inter ne Kundens chnittstellen SK CU 4 … [SK 1x xE, SK 2xx E] @ 1\m od_1342697057640_14638.docx @ 35403 @ 3 @ 1 2.2.2 Mounting of internal customer unit SK CU4-…...
NORDAC FLEX (SK 200E ... SK 235E) – Users Manual for Frequency Inverters Pos : 99 /Anl eitungen/Elek tronik/FU und Starter/2. M ontage und Ins tall ati on/M ontage/M otormontage - Standard [SK 1xx E, SK 2xxE]/M ontage externe T echnologieboxen SK TU4 … _01 [SK 1xx E / SK 2xx E] @ 24\mod_1537879840531_14638.docx @ 2452527 @ 3 @ 1 2.2.3 Installation of external technology units SK TU4-…...
2 Mounting and installation Pos : 102 /Anleitungen/El ektr onik /FU und Starter/2. M ontage und Installation/Z ubehör/Brem swiderstand/SK 1x 0E, SK 2x xE/Brem swiderstand ( BW) (Überschrift +) [SK 1x 0E, SK 2x xE] @ 1\mod_1342513979710_14638.docx @ 32689 @ 2 @ 1 2.3 Braking resistor (BW) - (from size 1) During dynamic braking (frequency reduction) of a three-phase motor, electrical energy is fed back to the inverter if necessary.
Page 54
NORDAC FLEX (SK 200E ... SK 235E) – Users Manual for Frequency Inverters Installation Size 1 … 3 Size 4 BU 0200 en-US-4920...
Page 55
2 Mounting and installation The capacity of the SK BRI4 is limited (see also the following note field) and can be calculated as = ∗ �1 + � ( 30/ ) � follows. but the following applies P < P (P=braking power (W), P = continuous braking power of resistor (W), P .
NORDAC FLEX (SK 200E ... SK 235E) – Users Manual for Frequency Inverters Pos : 109 /Anleitungen/El ektr onik /FU und Starter/2. M ontage und Installation/Z ubehör/Brem swiderstand/SK 1x 0E, SK 2x xE/Ex ter ner Bremswi derstand SK BR E4-... [SK 1x0E, SK 2xx E] @ 19\mod_1507879999377_14638.docx @ 2367759 @ 3 @ 1 2.3.2 External braking resistor SK BRE4-...
Page 57
2 Mounting and installation Pos : 115 /Anleitungen/El ektr onik /FU und Starter/2. M ontage und Installation/Z ubehör/Brem swiderstand/SK 1x 0E, SK 2x xE/Ex ter ner Bremswi derstand SK BR E4-..._Ergänz ung 3a_für w andmonti erte FU [SK 1x0E, SK 2xx E] @ 19\mod_1507729672527_14638.docx @ 2367377 @ 5 @ 1 External braking resistors for wall-mounted variable frequency drives The SK BRW4- series is intended for wall mounting in the vicinity of a wall-mounted variable frequency drive.
Pos : 119 /Anleitungen/El ektr onik /FU und Starter/2. M ontage und Installation/Z ubehör/Brem swiderstand/SK 1x 0E, SK 2x xE/Zuordnung Bremswi ders tand [SK 2x xE] @ 4\m od_1395244797555_14638.docx @ 122619 @ 3 @ 1 2.3.3 Braking resistor assignments NORD braking resistors are tailored directly to the individual devices. However, when external braking resistors are being used, it is usually possible to select between 2 or 3 alternatives.
2 Mounting and installation Pos : 121 /Anleitungen/El ektr onik /FU und Starter/2. M ontage und Installation/Elek trischer Ans chl uss/Elek trischer Ans chl uss _01 (Ü bers chrift) [SK 1xx E, SK 2xxE, SK 5xx E, SK xx xE-FD S, SK 500P, SK300P] @ 12\m od_1467020207250_14638.docx @ 333211 @ 2 @ 1 2.4 Electrical connection Pos : 122 /Anleitungen/El ektr onik /FU und Starter/1.
NORDAC FLEX (SK 200E ... SK 235E) – Users Manual for Frequency Inverters Pos : 128 /Anleitungen/El ektr onik /FU und Starter/2. M ontage und Installation/Elek trischer Ans chl uss/Ver drahtungsrichtlini en_T eil 1 [SK 1x xE, SK 2xx E, SK 5xxE, SK xxxE-FD S, SK 5xxP] @ 6\mod_1427959760767_14638.doc x @ 211388 @ 3 @ 1 2.4.1 Wiring guidelines The devices were developed for use in an industrial environment.
2 Mounting and installation Pos : 135 /Anleitungen/El ektr onik /FU und Starter/2. M ontage und Installation/Elek trischer Ans chl uss/SK 1xxE, SK 2xx E, SK 5xxP, SK xxx E-FDS/Leistungsteil/Elektrisc her Ansc hluss Leis tungsteil_T eil0_Übersc hrift [SK 1xx E, SK 2xxE, -FDS, SK 5xx P] @ 19\mod_1511526725283_14638.docx @ 2372465 @ 3 @ 1 2.4.2 Electrical connection of power unit Pos : 136 /Anleitungen/El ektr onik /FU und Starter/1.
NORDAC FLEX (SK 200E ... SK 235E) – Users Manual for Frequency Inverters Pos : 140 /Anleitungen/El ektr onik /FU und Starter/2. M ontage und Installation/Elek trischer Ans chl uss/SK 1xxE, SK 2xx E, SK 5xxP, SK xxx E-FDS/Leistungsteil/Elektrisc her Ansc hluss Leis tungsteil_T eil3 - Netzansc hluss [SK 2xxE] @ 7\mod_1434537482294_14638.doc x @ 226551 @ 4 @ 1 2.4.2.1 Power supply connection (L1, L2(/N), L3, PE) No special safety measures are required at the line input side of the device.
2 Mounting and installation Pos : 145 /Anleitungen/El ektr onik /FU und Starter/2. M ontage und Installation/Elek trischer Ans chl uss/SK 1xxE, SK 2xx E, SK 5xxP, SK xxx E-FDS/Leistungsteil/Elektrisc her Ansc hluss Leis tungsteil_T eil3 - Anpass ung an IT-Netz e_01 [SK 1x0E, SK 2xx E] @ 1\m od_1342534014378_14638.docx @ 33578 @ @ 1 For operation in an IT system (ungrounded), make simple adaptations by relocating the jumpers =OFF).
NORDAC FLEX (SK 200E ... SK 235E) – Users Manual for Frequency Inverters Pos : 151 /Anleitungen/El ektr onik /FU und Starter/2. M ontage und Installation/Elek trischer Ans chl uss/SK 1xxE, SK 2xx E, SK 5xxP, SK xxx E-FDS/Leistungsteil/Elektrisc her Ansc hluss Leis tungsteil_T eil3 - Motork abel_01 [SK 1x0E, SK 2xxE, SK 2xx E-FDS, SK 5xx P] @ 48\m od_1596699827741_14638.docx @ 2658078 @ 4 @ 1 2.4.2.2 Motor cable The motor cable may have a total length of 25 m if it is a standard cable type (take EMC into...
2 Mounting and installation Pos : 157 /Anleitungen/El ektr onik /FU und Starter/2. M ontage und Installation/Elek trischer Ans chl uss/SK 1xxE, SK 2xx E, SK 5xxP, SK xxx E-FDS/Leistungsteil/Elektrisc her Ansc hluss Leis tungsteil_T eil3 - El ektrom ec h. Brem se_01 [SK 2xx E] @ 1\m od_1342533209199_14638.doc x @ 33504 @ 4 @ 1 2.4.2.4 Electromechanical brake Only valid for SK 2x5E size 1 - 3 and SK 2x0E size 4:...
NORDAC FLEX (SK 200E ... SK 235E) – Users Manual for Frequency Inverters Pos : 160 /Anleitungen/El ektr onik /FU und Starter/2. M ontage und Installation/Elek trischer Ans chl uss/SK 1xxE, SK 2xx E, SK 5xxP, SK xxx E-FDS/Steuerteil/El ektrisc her Ansc hlus s Steuerteil [SK 2xx E] @ 20\mod_1513343185610_14638.doc x @ 2375937 @ 3 @ 1 2.4.3 Electrical connection of the control unit Connection data: Terminal block...
Page 67
2 Mounting and installation Information Reaction time of digital inputs The reaction time of a digital signal is approx. 4-5 ms and consists of the following: Scan time 1 ms Signal stability check 3 ms Internal processing < 1 ms For digital inputs DIN2 and DIN3 there is a parallel channel which relays the signal pulses between 250 Hz and 205 kHz directly to the processor, and therefore makes it possible for a rotary encoder to be evaluated.
Page 68
TF+/-: PTC thermistor connection of motor Connections depending on the variable frequency drive type Detailed information regarding functional safety (safe stop) can be found in supplementary manual BU0230. - www.nord.com Sizes 1 ... 3 SK 200E SK 210E SK 220E...
Page 69
2 Mounting and installation Size 4 SK 200E SK 210E SK 220E SK 230E Device model (SH) (ASI) (SH+ASI) Labeling 24 V (output) 24 V (output) -/84 ASI+ -/85 ASI- 10 V REF AIN1+ AIN2+ AGND 24 V (input) 24 V (input) DIN1 DIN2 DIN3...
Page 70
NORDAC FLEX (SK 200E ... SK 235E) – Users Manual for Frequency Inverters Pos : 165.1 /Anleitungen/El ektr onik /FU und Starter/2. M ontage und Installation/Elek trischer Ansc hl uss/SK 1x xE, SK 2xx E, SK 5xxP, SK xxxE-FD S/Steuerteil/Details Steuer anschl üss e (Sammlung)/Details Steuer anschl üss e_00_Tabell enkopf_[SK 1xx E, SK 2xx E, SK 5xxP] @ 7\m od_1435561812889_14638.docx @ 228819 @ @ 1 Meaning, Functions Description/Technical data Terminal...
Page 71
Pos : 165.12 /Anl eitungen/Elektronik/FU und Starter/2. Montage und Installati on/El ektrisc her Ansc hlus s/SK 1xx E, SK 2xxE, SK 5xx P, SK xx xE-FD S/Steuerteil/D etails Steueransc hlüsse (Sammlung)/Details Steueransc hl üss e_07_SYS [SK 1x0E, SK 2xxE] @ 7\mod_1435563267345_14638.docx @ 229363 @ @ 1 System bus NORD-specific bus system for communicating with other devices (e.g. smart optional modules or variable frequency drives) ...
2 Mounting and installation Pos : 167 /Anleitungen/El ektr onik /FU und Starter/2. M ontage und Installation/Elek trischer Ans chl uss/SK 1xxE, SK 2xx E, SK 5xxP, SK xxx E-FDS/Steuerteil/Netzteil, SK CU4 24V … - Ansc hlus sbeispi el_01 [SK 2xxE] @ 4\mod_1395151789027_14638.docx @ 122317 @ 3 @ 1 2.4.4 Power supply unit SK xU4-24V-…...
Page 74
NORDAC FLEX (SK 200E ... SK 235E) – Users Manual for Frequency Inverters With device variants SK 2x0E, a power supply unit is integrated and so no external 24 V DC voltage supply is required. For sizes 1-3 connection of an external power source (e.g. power supply unit SK xU4-24V-…) is not provided.
NORDAC FLEX (SK 200E ... SK 235E) – Users Manual for Frequency Inverters Pos : 175.1 /Anleitungen/El ektr onik /FU und Starter/2. M ontage und Installation/ATEX und EAC EX ( SK 1xx E, SK 200E)/!Betri eb in ex plosionsgefährdeter Umgebung (AT EX, EAC Ex) _01 (Ü bersc hrift) [SK 1xx E / SK 2xx E] @ 22\mod_1528892587259_14638.docx @ 2426600 @ 2 @ 1 2.6 Operation in potentially explosive environments Pos : 175.2 /Anleitungen/El ektr onik /FU und Starter/1.
Only a specially modified device is permissible for operation in ATEX zone 22. This adaptation is only made at the NORD factory. In order to use the device in ATEX zone 22, the diagnostic caps are replaced with anodized oil inspection glasses, among other things.
NORDAC FLEX (SK 200E ... SK 235E) – Users Manual for Frequency Inverters Pos : 175.13 /Anl eitungen/Elektronik/FU und Starter/2. Montage und Installati on/AT EX und EAC EX (SK 1xx E, SK 200E)/Optionen für AT EX- Z one 22 3D_01 [SK 1xxE / SK 2xxE] @ 1\mod_1342618238790_14638.docx @ 34843 @ 4 @ 1 2.6.1.2 Options for ATEX zone 22, category 3D In order to ensure that the device is ATEX-compliant, its optional modules must also be approved for...
Page 79
2 Mounting and installation Pos : 175.16 /Anl eitungen/Elektronik/FU und Starter/2. Montage und Installati on/AT EX und EAC EX (SK 1xx E, SK 200E)/SK AT X-POT [SK 1x0E / SK 2xx E] @ 4\m od_1395840390747_14638.docx @ 123212 @ 5 @ 1 SK ATX-POT The category 3D variable frequency drive can be equipped with an ATEX-compliant 10 kΩ...
Pos : 175.21 /Anl eitungen/Elektronik/FU und Starter/2. Montage und Installati on/AT EX und EAC EX (SK 1xx E, SK 200E)/Inbetriebnahme-Hinw eis e - ATEX_02 [SK 1x 0E, SK2xxE] @ 8\mod_1441028640125_14638.docx @ 238455 @ 5 @ 1 In addition, make sure to use a NORD motor from the motor list (P200). If a standard 4-pole NORD motor or a motor from a different manufacturer is not used, data for the motor parameters ((P201) to (P208)) must be adjusted to those on the motor nameplate.
Page 81
[50] that a motor speed of 3000 rpm is not maximum frequency exceeded. Select appropriate If a 4-pole NORD motor is used, the pre-set P200 motor power motor data can be called up. motor list If a 4-pole NORD motor is not used, the Data according to P201 –...
NORDAC FLEX (SK 200E ... SK 235E) – Users Manual for Frequency Inverters Pos : 175.23 /Anl eitungen/Elektronik/FU und Starter/2. Montage und Installati on/AT EX und EAC EX (SK 1xx E, SK 200E)/EU-Konformitäts erklär ung - AT EX [SK 1x xE, SK 2xx E] @ 1\m od_1342604219271_14638.docx @ 34083 @ 4 @ 1 2.6.1.5 EU conformity declaration - ATEX Pos : 176 /Allgem ein/Allgem eingültig e Module/---------Seitenumbr uc h k ompakt --------- @ 13\m od_1476369695906_0.doc x @ 2265496 @ @ 1...
2 Mounting and installation Pos : 177.1 /Anleitungen/El ektr onik /FU und Starter/2. M ontage und Installation/ATEX und EAC EX ( SK 1xx E, SK 200E)/EAC EX/Betrieb i n expl osi onsg efähr deter Umg ebung - EAC EX_01 (Ü bersc hrift) [SK 1xx E / SK 2xx E] @ 22\mod_1528899724767_14638.docx @ 2426832 @ 3 @ 1 2.6.2 Operation in potentially explosive environments - EAC Ex Pos : 177.2 /Anleitungen/El ektr onik /FU und Starter/2.
NORDAC FLEX (SK 200E ... SK 235E) – Users Manual for Frequency Inverters 2.6.2.2 Further information Further information about explosion protection can be found in the following sections. Section Description "Options for ATEX zone 22, category 3D" 2.6.1.2 "Maximum output voltage and torque reduction" 2.6.1.3 "Commissioning information"...
UV-resistant version. Please contact the Getriebebau NORD service department. Pos : 182 /Anleitungen/El ektr onik /FU und Starter/3. Anz eige, Bedienung und Optionen/Anzeige, Bedienung und Optionen [SK 1xx E, SK 2xxE, SK xxx E-FDS] @ 1\m od_1343200302232_14638.docx @ 36912 @ 1 @ 1...
NORDAC FLEX (SK 200E ... SK 235E) – Users Manual for Frequency Inverters 3 Display, operation and options Pos : 183 /Anleitungen/El ektr onik /FU und Starter/3. Anz eige, Bedienung und Optionen/Anzeige, Bedienung und Optionen_01 [SK 2xx E] @ 8\m od_1441111756429_14638.docx @ 238818 @ @ 1 In the factory default configuration, without additional options, the diagnostic LEDs are externally visible.
3 Display, operation and options Pos : 186 /Anleitungen/El ektr onik /FU und Starter/3. Anz eige, Bedienung und Optionen/Bedi enung [SK 1xx E, 2xx E, -FDS]/Bedi en- und Param etri eroptionen [SK 1xx E, SK 2xx E] @ 4\mod_1395155071295_14638.docx @ 122342 @ 2 @ 1 3.1 Control and parameterization options Various control options are available that can be mounted directly to the device or in close proximity to it and directly connected.
NORDAC FLEX (SK 200E ... SK 235E) – Users Manual for Frequency Inverters Pos : 189 /Anleitungen/El ektr onik /FU und Starter/3. Anz eige, Bedienung und Optionen/Bedi enung [SK 1xx E, 2xx E, -FDS]/Bedi en- und Param etri erboxen, Verwendung_01 [SK 1x 0E, SK 2x xE, SK xx xE-FD S] @ 48\mod_1597666648135_14638.docx @ 2663129 @ 35 @ 1 3.1.1 Use of control and parameterization units All parameters can be conveniently accessed for reading or editing by means of an optional Simple Box or Parameter Box.
RJ12). Conditions/restrictions: Basically, all of the currently available variable frequency drives from NORD can communicate via a common system bus. When devices in the SK 5xxE model series are incorporated, the framework conditions described in the manual for the device series concerned must be noted.
NORDAC FLEX (SK 200E ... SK 235E) – Users Manual for Frequency Inverters Pos : 194 /Anleitungen/El ektr onik /FU und Starter/3. Anz eige, Bedienung und Optionen/Optionen [SK 1xx E, SK 2xxE]/Opti onsbaugruppen [SK 1xx E, SK 2xxE] @ 8\mod_1441202922301_14638.doc x @ 239251 @ 2 @ 1 3.2 Optional modules Pos : 195 /Anleitungen/El ektr onik /FU und Starter/3.
Page 91
3 Display, operation and options Pos : 199 /Anleitungen/El ektr onik /FU und Starter/3. Anz eige, Bedienung und Optionen/Optionen [SK 1xx E, SK 2xxE]/Interne Kundensc hnittstellen SK CU 4 … _02[SK 1x0E, SK 2xxE] @ 4\mod_1395129978897_14638.doc x @ 122187 @ @ 1 Designation *) Material number Document...
NORDAC FLEX (SK 200E ... SK 235E) – Users Manual for Frequency Inverters Pos : 201 /Anleitungen/El ektr onik /FU und Starter/3. Anz eige, Bedienung und Optionen/Optionen [SK 1xx E, SK 2xxE]/Externe T echnologieboxen SK TU 4 … [SK 1xx E, SK 2xxE] @ 1\mod_1342689639572_14638.doc x @ 35159 @ 3 @ 1 3.2.2 External technology units SK TU4-…...
3 Display, operation and options Pos : 204 /Anleitungen/El ektr onik /FU und Starter/3. Anz eige, Bedienung und Optionen/Optionen [SK 1xx E, SK 2xxE]/Externe T echnologieboxen SK TU 4 … _02 ( BUS) [SK 1x 0E, SK 2xx E] @ 4\m od_1395132027229_14638.docx @ 122242 @ @ 1 Model IP55 IP66...
3 Display, operation and options Pos : 209 /Anleitungen/El ektr onik /FU und Starter/3. Anz eige, Bedienung und Optionen/Optionen [SK 1xx E, SK 2xxE]/Steckv erbinder [SK 1x xE, SK 2xx E]/Steckv erbi nder (Ü bersc hrift+) [SK 1xx E, SK 2x xE] @ 1\m od_1342602553776_14638.docx @ 33772 @ 3 @ 1 3.2.3 Plug connector The use of optionally available plug connectors for power and control connections not only makes it possible to replace the drive unit with almost no loss of time in case of servicing, but also minimizes...
Page 96
NORDAC FLEX (SK 200E ... SK 235E) – Users Manual for Frequency Inverters Plug connector (selection) Model Data Designation Material No. Document Power input 500 V, 16 A SK TIE4-HANQ8-K-LE-MX 275 135 030 TI 275135030 Power input 500 V, 16 A SK TIE4-HAN10E-M1B-LE 275 135 070 TI 275135070...
3 Display, operation and options Pos : 213 /Anleitungen/El ektr onik /FU und Starter/3. Anz eige, Bedienung und Optionen/Optionen [SK 1xx E, SK 2xxE]/Steckv erbinder [SK 1x xE, SK 2xx E]/Steckv erbi nder für Steueransc hl uss _00 [SK 1xxE, SK 2xx E] @ 1\m od_1342606037355_14638.docx @ 34568 @ 4 @ 1 3.2.3.2 Plug connectors for control connection Various M12 round plug connectors are available as...
NORDAC FLEX (SK 200E ... SK 235E) – Users Manual for Frequency Inverters Pos : 219 /Anleitungen/El ektr onik /FU und Starter/3. Anz eige, Bedienung und Optionen/Bedi enung [SK 1xx E, 2xx E, -FDS]/Poti-Adapter, SK CU 4 POT [SK 2xx E] @ 58\mod_1606118662319_14638.doc x @ 2694721 @ 3 @ 1 3.2.4 Potentiometer adapter, SK CU4-POT Part no.: 275 271 207 Digital signals R and L can be directly applied to the corresponding digital inputs 1 and 2 of the...
3 Display, operation and options 1/3~ 115/230/400V + PE L1 - L2/N - L3 L1 - L2/N 115/230/400V 115/230/400V 24V power supply unit Frequenzumrichter 24V Netzteil Variable frequency SK CU4-24V-… SK 2x5E-... SK CU4-24V-... drive SK 2x5E-… 24V= (BN) (br) Control terminal block Steuerklemmenleiste (bl)
Pos : 224 /Anleitungen/El ektr onik /FU und Starter/4. Inbetriebnahm e/SK 1x xE, SK 2xx E, -FD S/W erksei nstellungen/W erksei nstellungen_01 [SK 1x0E, SK 2xx E, SK 2x xE-FD S] @ 8\mod_1441286953067_14638.docx @ 239677 @ @ 1 All variable frequency drives supplied by Getriebebau NORD are pre-programmed with the default setting for standard applications with 4 pole standard motors (same voltage and power).
IPMSM type (interior permanent-magnet synchronous motor). The permanent magnets in these motors are embedded in the rotor. NORD must check the operation of other brands if necessary. Please refer as well to Technical Information TI 80-0010 "Planning and commissioning guidelines for NORD IE4 motors with NORD variable frequency drives".
Page 102
NORDAC FLEX (SK 200E ... SK 235E) – Users Manual for Frequency Inverters Operation according to a V/f characteristic curve is only suitable for drive applications with relatively low demands on the quality of speed control and dynamics (ramp times ≥ 1 s). For machines which tend to have relatively large mechanical vibrations due to their construction, control according to a V/f characteristic curve can also be advisable.
4 Commissioning Pos : 228.7 /Anleitungen/El ektr onik /FU und Starter/4. Inbetri ebnahm e/Inbetriebnahme Betriebs arten M otorregler ( P300) [SK 1x 0E, SK 2xx E, SK 5xxE]/Par ameter übersic ht R eglerei nstellung [SK 2x xE, SK 5xx E, SK 2xxE-FD S] @ 6\m od_1421067020960_14638.docx @ 198342 @ 3 @ 1 4.2.2 Overview of control parameter settings The following provides an overview of all parameters which are of importance, depending on the selected operating mode.
7. Rotary encoder: Check the settings (P301, P735) 8. with PMSM only: a. EMF voltage (P240) motor nameplate/motor data sheet b. Determine/set reluctance angle (P243) (not required with NORD motors) c. Peak current (P244) motor data sheet d. Only for PMSMs in VFC mode: determine (P245), (P247) e.
The plug-in EEPROM is not required in this configuration. By changing parameters with the control and parameterization unit (SK CSX-3H or SK PAR-3H) or the NORD CON PC-supported software. The changes to the parameters in the plug-in EEPROM (memory module) are stored when doing this.
Data on motor nameplate P220, function 1 Measure stator resistance Value is written to P208 alternatively Motor data list Selection of a 4-pole standard NORD motor from a list P200 alternatively Motor identification Complete measurement of a connected motor P220, function 2...
4 Commissioning Pos : 240 /Anleitungen/El ektr onik /FU und Starter/4. Inbetriebnahm e/SK 1x xE, SK 2xx E, -FD S/Inbetriebnahme Gerät/DIP- Sc halter (S1) [SK 2xxE] @ 1\mod_1343219568354_14638.doc x @ 37377 @ 45 @ 1 4.3.2.2 DIP switches (S1) These DIP switches make it possible to carry out commissioning without additional control units. Further settings are entered through the potentiometer on top of the variable frequency drive (P1/P2, SK 2x5E only).
Page 108
NORDAC FLEX (SK 200E ... SK 235E) – Users Manual for Frequency Inverters Details of DIP switch S1: 5/4 and 3 Applies to devices SK 20xE, SK 21xE (without on-board AS interface) Functions as per the list of Functions as per the list of digital functions (P420) analog functions (P400) Dig 1 Dig 2...
4 Commissioning Pos : 242 /Anleitungen/El ektr onik /FU und Starter/4. Inbetriebnahm e/SK 1x xE, SK 2xx E, -FD S/Inbetriebnahme Gerät/DIP- Sc halter Analog eingang (nur SK 2x 0E) [SK 2xx E] @ 1\m od_1343221317551_14638.docx @ 37526 @ 45 @ 1 4.3.2.3 DIP switches, analog input (only SK 2x0E) The analog inputs in the SK 2x0E are suitable for current and voltage...
NORDAC FLEX (SK 200E ... SK 235E) – Users Manual for Frequency Inverters Pos : 244 /Anleitungen/El ektr onik /FU und Starter/4. Inbetriebnahm e/SK 1x xE, SK 2xx E, -FD S/Inbetriebnahme Gerät/Potentiom etern P1 und P2 (SK 2x0E BG 4 und SK 2x 5E) [SK 2xxE] @ 1\mod_1343222441209_14638.docx @ 37550 @ 4 @ 1 4.3.2.4 Potentiometers P1 and P2 (SK 2x0E size 4 and SK 2x5E) The setpoint can be set to a fixed value with integrated potentiometer P1.
4 Commissioning Pos : 246 /Anleitungen/El ektr onik /FU und Starter/4. Inbetriebnahm e/SK 1x xE, SK 2xx E, -FD S/Inbetriebnahme Gerät/Steck bares EEPR OM („Mem ory-Modul“) @ 6\mod_1430230225852_14638.doc x @ 212879 @ 3 @ 1 4.3.3 Plug-in EEPROM (memory module) The variable frequency drive is equipped with an internal EEPROM and a plug-in EEPROM (memory module) which operates in parallel to this for the storage and management of parameter data.
NORDAC FLEX (SK 200E ... SK 235E) – Users Manual for Frequency Inverters Downward compatibility: In principle, it is permissible to operate older-generation variable frequency drives with an EEPROM from a newer generation and vice versa. Please note: Before the exchange of data, in addition to the firmware status (software versions) of the two variable frequency drives, it is also necessary to compare the hardware versions of the variable frequency drives and the EEPROMS, because: –...
Page 113
4 Commissioning Starting the copy function To start the copy function, set DIP switch S1-6 "COPY" from position { 0 } (factory setting) to position { 1 }. A 0 1 flank is detected here and the copying process is started at the next start of the variable frequency drive.
All SK 2xxE devices can basically be operated in the condition in which they are delivered. Standard motor data of a standard NORD 4-pole asynchronous motor of the same power is parameterized. The PTC input must be bypassed if no motor PTC is available. Parameter (P428) must be changed if an automatic startup with "Power On"...
4 Commissioning Pos : 254 /Anleitungen/El ektr onik /FU und Starter/4. Inbetriebnahm e/SK 1x xE, SK 2xx E, -FD S/Inbetriebnahme Gerät/Minimalk onfigur ation SK 2x5E [SK 2xxE] @ 1\mod_1345558127539_14638.doc x @ 38273 @ 45 @ 1 4.3.4.2 SK 2x5E minimum configuration Minimal configuration without options The variable frequency drive must be provided with an external control voltage.
Page 116
In order to use this function, it is essential that parameter (P428) "Automatic Start" be set to the "ON" function. Adjustment of parameters is possible with the aid of a Parameter Box (SK xxx-3H) or with the NORD CON software (Windows PC and adapter cable required).
4 Commissioning Pos : 259 /Anleitungen/El ektr onik /FU und Starter/4. Inbetriebnahm e/SK 1x xE, SK 2xx E, -FD S/T emper aturs ensor en/T emperaturs ensor en_01 [SK 1x 0E, SK 2xx E, SK 500P] @ 30\m od_1552554759926_14638.docx @ 2507310 @ 2 @ 1 4.4 Temperature sensors The current vector control of the variable frequency drive can be further optimized by the use of a temperature sensor.
Page 118
NORDAC FLEX (SK 200E ... SK 235E) – Users Manual for Frequency Inverters Pos : 263 /Anleitungen/El ektr onik /FU und Starter/4. Inbetriebnahm e/SK 1x xE, SK 2xx E, -FD S/T emper aturs ensor en/KTY84- 130 Anschl uss _Ansc hl uss beis piel e_01_Option [SK 1x0E, SK 2xx E] @ 8\m od_1441635716619_14638.docx @ 240755 @ 5 @ 1 Connection examples SK CU4-IOE / SK TU4-IOE-…...
Page 119
4 Commissioning Pos : 265 /Anleitungen/El ektr onik /FU und Starter/4. Inbetriebnahm e/SK 1x xE, SK 2xx E, -FD S/T emper aturs ensor en/KTY84- 130 Anschl uss _Ansc hl uss beis piel e_02_Ger ät [SK 1x 0E, SK 2xx E] @ 8\m od_1441637124865_14638.docx @ 240819 @ @ 1 SK 2x0E A KTY-84 sensor may be connected to either of the two analog inputs of the SK 2x0E.
4 Commissioning Pos : 269.6 /Anleitungen/El ektr onik /FU und Starter/4. Inbetri ebnahm e/AS-Interfac e [alle Geräte]/Merkm ale und Technisc he Daten_01 [SK 1xxE, SK 2xx E, SK xxx E-FDS] @ 1\mod_1345713871281_14638.docx @ 39089 @ 3 @ 1 4.5.2 Features and technical data The device can be directly integrated in an AS interface network is parameterized in its factory settings so that the most frequently used AS-i functionality is available immediately.
NORDAC FLEX (SK 200E ... SK 235E) – Users Manual for Frequency Inverters Pos : 269.10 /Anl eitungen/Elektronik/FU und Starter/4. Inbetriebnahm e/AS-Interface [all e Ger äte]/Busaufbau und Topologie_01 [SK 1xx E, SK 2xxE, SK x xxE-FD S] @ 41\mod_1583920379238_14638.doc x @ 2596674 @ 3 @ 1 4.5.3 Bus structure and topology The AS interface network must be set up in any form (line, star, ring and tree structure) and is managed by an AS-interface master as the interface between the PLC and slaves.
4 Commissioning Pos : 269.14 /Anl eitungen/Elektronik/FU und Starter/4. Inbetriebnahm e/AS-Interface [all e Ger äte]/Inbetriebnahme [SK 1xx E, SK 2xxE, SK xxxE-FD S] @ 2\m od_1347364111083_14638.docx @ 45182 @ 3 @ 1 4.5.4 Commissioning Pos : 269.15 /Anl eitungen/Elektronik/FU und Starter/4. Inbetriebnahm e/AS-Interface [all e Ger äte]/Anschl uss _01 [SK 1xx E, SK 2xxE] @ 8\mod_1443084432375_14638.docx @ 245731 @ 4 @ 1 4.5.4.1 Connection Connection of the AS interface cable (yellow) is made via terminals 85/85 of the terminal block and...
Page 124
NORDAC FLEX (SK 200E ... SK 235E) – Users Manual for Frequency Inverters Pos : 269.21 /Anl eitungen/Elektronik/FU und Starter/4. Inbetriebnahm e/AS-Interface [all e Ger äte]/Anschl uss _06_01 ( Vari anten 24V Vers orgung Peripheri e) [SK 2xx E] @ 21\m od_1528458786862_14638.docx @ 2425080 @ 5 @ 1 Variants of a 24 V supply for the peripherals (e.g.
Page 125
4 Commissioning Variant 2 – use of an optional power supply unit SK xU4-24V-… Since the permissible load of terminal 44 is limited to 60 mA when using the AS interface, if there is an increased power requirement it is possible to incorporate a power supply unit (e.g. SK CU4-24V-…) to supply power to additional peripherals.
NORDAC FLEX (SK 200E ... SK 235E) – Users Manual for Frequency Inverters Pos : 269.25 /Anl eitungen/Elektronik/FU und Starter/4. Inbetriebnahm e/AS-Interface [all e Ger äte]/Anzeigen_01 [SK 1xxE, SK 2xx E, SK 1xx E-FDS] @ 9\m od_1443602542071_14638.docx @ 247818 @ 4 @ 1 4.5.4.2 Displays The status of the AS interface is signaled by a multi-...
Because of the low load reserves of the low voltage when using the AS interface, it is advisable to parameterize the variable frequency drive with the aid of NORD CON software. The use of a parameterization unit (SK PAR-3H/SK CSX-3H) can cause damage to the variable frequency drive, particularly during long periods of operation.
Page 128
NORDAC FLEX (SK 200E ... SK 235E) – Users Manual for Frequency Inverters Pos : 269.30 /Anl eitungen/Elektronik/FU und Starter/4. Inbetriebnahm e/AS-Interface [all e Ger äte]/Konfigur ati on_02 (BUs I/O Bits_Ü berschrift) @ 19\m od_1511865687254_14638.docx @ 2373828 @ 5 @ 1 Bus I/O bits Pos : 269.31 /Anl eitungen/Elektronik/FU und Starter/1.
4 Commissioning Pos : 269.36 /Anl eitungen/Elektronik/FU und Starter/4. Inbetriebnahm e/AS-Interface [all e Ger äte]/Adr essi erung_01 [SK 1xx E, SK 2xxE, SK 1xx E-FDS] @ 9\mod_1444202497668_14638.doc x @ 248675 @ 4 @ 1 4.5.4.4 Addressing In order to use the device in an AS-i network, it must have a unique address. The address is set to 0 in the factory.
Currently available certificates can be found on the Internet at link "www.nord.com" Pos : 271 /Anleitungen/El ektr onik /FU und Starter/5. Par ameter/Allgemei n/Par ameter _00_Übersc hrift [SK 1xxE, SK 2x xE, SK xx xE-FD S, SK 500E, SK 500P] @ 9\m od_1446540603703_14638.docx @ 260325 @ 1 @ 1...
5 Parameter 5 Parameter Pos : 272 /Anleitungen/El ektr onik /FU und Starter/1. Allgemei nes /Sic herheits- und Ins tall ations hinw eis e und W arn- Gefahrenhinw eise/neu/War n- und Gefahrenhinw eise/WARNUN G - U nerw artete Bew egung [Umrichter] @ 33\mod_1557225504645_14638.docx @ 2533756 @ @ 1 WARNING Unexpected movement Connection of the supply voltage may directly or indirectly set the device into motion.
Page 132
NORDAC FLEX (SK 200E ... SK 235E) – Users Manual for Frequency Inverters WARNING Unexpected movement due to overload In case of overload of the drive there is a risk that the motor will "break down" (sudden loss of torque). An overload may be caused e.g.
Page 133
5 Parameter Pos : 276 /Anleitungen/El ektr onik /FU und Starter/5. Par ameter/Allgemei n/Par ameter _01 [SK 1xx E, SK 2x xE, SK x xxE-FD S] @ 9\m od_1446540728160_14638.docx @ 260427 @ @ 1 The relevant parameters for the device are described in the following. The parameters are accessed using a parameterization tool (e.g.
Page 134
NORDAC FLEX (SK 200E ... SK 235E) – Users Manual for Frequency Inverters The following applies as of firmware version V1.4 R2: All parameter changes are made in the internal EEPROM. If an external EEPROM has been connected, all changes are automatically stored on this as well. The external EEPROM therefore acts as an additional data backup.
5 Parameter Pos : 299 /Anleitungen/El ektr onik /FU und Starter/5. Par ameter/P0xx Betriebsanz eige @ 0\mod_1327573414463_14638.docx @ 14890 @ 3 @ 1 5.2.1 Operating display Abbreviations used • VFD = variable frequency drive • SW = software version, stored in P707. •...
Page 140
NORDAC FLEX (SK 200E ... SK 235E) – Users Manual for Frequency Inverters 60 = Stator R ID Stator resistance determined by means of measurement (P220) 61 = Rotor R ID Rotor resistance determined by measurement ((P220) function 2) 62 = Stator stray L ID Leakage inductance determined by measurement ((P220) function 63 =...
By selecting one of the possible digits and pressing the ENTER key, all of the motor parameters (P201 ... P209) are set to the selected standard power. The motor data is based on a 4-pole three- phase standard motor. The motor data for NORD IE4 motors can be found in the final section of the list.
Page 149
5 Parameter No change No motor: In this setting the VFD operates without current control, slip compensation and pre-magnetizing time, and is therefore not recommended for motor applications. Possible applications are induction furnaces or other applications with coils and transformers. In this case, the following motor data is set: 50.0 Hz/1500 rpm/15.0 A/400 V/0.00 kW/cos ϕ=0.90/star/R 0.01 Ω/I 6.5 A...
Page 150
NORDAC FLEX (SK 200E ... SK 235E) – Users Manual for Frequency Inverters Pos : 341 /Anleitungen/El ektr onik /FU und Starter/5. Par ameter/Par ameter auflistung (P000 ...)/P200- P299/Param eter P203 – Motor N enns trom @ 41\mod_1586433053290_14638.doc x @ 2601030 @ @ 1 Nominal current P203 (rated motor current)
Page 151
5 Parameter Stator resistance P208 (stator resistance) 0.00 ... 300.00 Ω Motor stator resistance ⇒ Resistance of a phase winding with a three-phase motor. { see information } Has a direct effect on current control of the VFD. Too high a value can lead to overcurrent; too low a value to low motor torque.
Page 152
NORDAC FLEX (SK 200E ... SK 235E) – Users Manual for Frequency Inverters Information V/f characteristic curve With certain applications, particularly those with high centrifugal mass (e.g. fan drives), it may be necessary to control the motor with the aid of a U/f characteristic curve. In order to do this, set parameters P211 and P212 each to 0%.
Page 153
5 Parameter Oscillation damping P217 (oscillation damping) 0 ... 400 % No-load resonance vibrations can be damped with oscillation damping. Parameter 217 is a measure of the damping capacity. { 10 } In oscillation damping the oscillation component is filtered out of the torque current by means of a high-pass filter.
Page 154
NORDAC FLEX (SK 200E ... SK 235E) – Users Manual for Frequency Inverters Pos : 365 /Anleitungen/El ektr onik /FU und Starter/5. Par ameter/Par ameter auflistung (P000 ...)/P200- P299/Param eter P219 – Auto.M agn.anpass ung @ 0\m od_1327590637383_14638.docx @ 14931 @ @ 1 Auto.
Page 155
5 Parameter Pos : 368 /Anleitungen/El ektr onik /FU und Starter/5. Par ameter/Par ameter auflistung (P000 ...)/P200- P299/Param eter P220 – Para.-identi fikation @ 0\mod_1327590796917_14638.doc x @ 14933 @ @ 1 P220 Par. identification (parameter identification) 0 … 2 In devices with output of up to 22 KW the motor data is determined automatically by the device via these parameters.
Page 156
90°, as with SPMSMs, but rather with larger values. This additional angle, which can be assumed to be 10° for NORD motors, can be taken into account with this parameter. The smaller the angle, the smaller the reluctance component.
5 Parameter Pos : 378 /Anleitungen/El ektr onik /FU und Starter/5. Par ameter/P3xx R egelungs par ameter [SK 2xxE] @ 1\mod_1346320887745_14638.docx @ 40078 @ 3 @ 1 5.2.4 Control parameter In combination with an HTL incremental encoder, a closed speed control loop can be set up using digital inputs 2 and 3 of the VFD.
Page 159
5 Parameter Pos : 383 /Anleitungen/El ektr onik /FU und Starter/5. Par ameter/Par ameter auflistung (P000 ...)/P300- P399/Param eter P310 – Drehz ahl R egler P @ 0\mod_1327591703606_14638.doc x @ 14941 @ @ 1 Speed Controller P P310 (speed controller P) 0 ...
Page 160
NORDAC FLEX (SK 200E ... SK 235E) – Users Manual for Frequency Inverters Field current controller limit P317 (field current controller limit) 0 ... 400 V Determines the maximum voltage span of the field current controller. The higher the value, the greater the maximum effect that can be exercised by the field current controller.
Page 162
NORDAC FLEX (SK 200E ... SK 235E) – Users Manual for Frequency Inverters Pos : 402 /Anleitungen/El ektr onik /FU und Starter/5. Par ameter/Par ameter auflistung (P000 ...)/P300- P399/Param eter P330 – Startr otorlage Erk ennung [SK 180E, SK 2xx E, SK 5xx E] @ 19\mod_1507647890368_14638.docx @ 2367100 @ @ 1 Rotor starting position detection P330 (rotor starting position detection)
Page 163
(P332). This conflict of objectives therefore cannot be resolved simultaneously for both optimization objectives. The default value is selected so that it typically does not need to be adjusted for NORD IE4 motors. Pos : 411 /Anleitungen/El ektr onik /FU und Starter/5. Par ameter/Par ameter auflistung (P000 ...)/P300- P399/Param eter P334 – Geberoffs et PM SM @ 0\mod_1327678017910_14638.docx @ 14961 @ @ 1...
Page 164
NORDAC FLEX (SK 200E ... SK 235E) – Users Manual for Frequency Inverters Pos : 414 /Anleitungen/El ektr onik /FU und Starter/5. Par ameter/Par ameter auflistung (P000 ...)/P300- P399/Param eter P336 – Mode R otorl agenident. [SK 2xx E(-FDS), SK 5x xE] @ 38\m od_1568383147815_14638.docx @ 2559466 @ @ 1 Mode rotorpos.
Page 165
5 Parameter Pos : 418 /Anleitungen/El ektr onik /FU und Starter/5. Par ameter/Par ameter auflistung (P000 ...)/P300- P399/Param eter P353 – Busz ustand über PLC @ 9\mod_1448363834229_14638.doc x @ 266483 @ @ 1 Bus status via PLC P353 (Bus status via PLC) 0 ...
NORDAC FLEX (SK 200E ... SK 235E) – Users Manual for Frequency Inverters Pos : 424 /Anleitungen/El ektr onik /FU und Starter/5. Par ameter/P4xx Steuerklemm en @ 0\m od_1327678262854_14638.docx @ 14962 @ 3 @ 1 5.2.5 Control terminals Parameter Parameter Setting value/description/note Supervisor {factory setting}...
Page 167
5 Parameter Pos : 429 /Anleitungen/El ektr onik /FU und Starter/5. Par ameter/Par ameter auflistung (P000 ...)/P400- P499/Param eter P400 – Param eterwerte [SK 2xx E] @ 2\m od_1346931796878_14638.docx @ 42380 @ @ 1 For standardization of actual values: ( Section 8.9 "Standardization of setpoint/target values"). 0 = Off, the analog input has no function.
Page 168
NORDAC FLEX (SK 200E ... SK 235E) – Users Manual for Frequency Inverters 18 = Curve control, the master receives the prevailing speed from the slave via the external analog input (P400 [-03] or P400 [-04]) or via the BUS (P546 [-01 .. -03]). The master calculates the prevailing setpoint speed from its own speed, the slave speed and the guide speed so that neither of the two drives travels faster than the guide speed in the curve.
Page 169
5 Parameter 2 = 0 – 10V controled: If the minimum f / Hz adjusted setpoint (P402) is undershot by 10% of the differential P105 value from P403 and P402, the VFD (fmax) output switches off. Once the setpoint is greater than [P402 - (10% * (P403 - P402))], it will deliver an output signal again.
Page 170
NORDAC FLEX (SK 200E ... SK 235E) – Users Manual for Frequency Inverters Pos : 434 /Anleitungen/El ektr onik /FU und Starter/5. Par ameter/Par ameter auflistung (P000 ...)/P400- P499/Param eter P402 – Abgleic h 0% [SK 2xx E] @ 2\m od_1346931798594_14638.docx @ 42455 @ @ 1 P402 [-01] Adjust: 0%...
Page 171
5 Parameter This parameter sets the voltage, which should correspond with the maximum value of the selected function for the analog input 1 or 2. In the factory setting (setpoint) this value is corresponds to the setpoint which is set via P105 >Maximum frequency<. Note SK 2x0E For the adjustment of the analog inputs integrated in the SK2x0E to the type of analog signals,...
Page 172
NORDAC FLEX (SK 200E ... SK 235E) – Users Manual for Frequency Inverters Pos : 439 /Anleitungen/El ektr onik /FU und Starter/5. Par ameter/Par ameter auflistung (P000 ...)/P400- P499/Param eter P400 ... P403 @ 0\mod_1327681197866_14638.docx @ 14973 @ @ 1 P400 ...
Page 173
The I component of the PI controller determines the frequency change, dependent on time. Note: In contrast to other NORD series, parameter P414 is smaller by a factor of 100 (Reason: better setting ability with small I-proportions). Pos : 446 /Anleitungen/El ektr onik /FU und Starter/5. Par ameter/Par ameter auflistung (P000 ...)/P400- P499/Param eter P415 – Gr enz e Proz eßr egler [SK 1x 0E, SK 2x xE, SK 2xx E-FDS] @ 2\mod_1346931801199_14638.docx @ 42571 @ @ 1...
Page 174
NORDAC FLEX (SK 200E ... SK 235E) – Users Manual for Frequency Inverters Pos : 450 /Anleitungen/El ektr onik /FU und Starter/5. Par ameter/Par ameter auflistung (P000 ...)/P400- P499/Param eter P418 – Funk tion Analog ausg ang [SK 1x0E, SK 2xx E, SK 2x xE-FD S] @ 58\mod_1606129314190_14638.docx @ 2694841 @ @ 1 P418 [-01] Analog output func.
Page 175
5 Parameter 30 = Set freq. befor ramp, ”Setpoint frequency before frequency ramp”, displays the frequency produced by any upstream controllers (ISD, PID, ...). This is then the target frequency for the power stage after it has been adjusted via the startup or braking ramp (P102, P103).
Page 176
NORDAC FLEX (SK 200E ... SK 235E) – Users Manual for Frequency Inverters Value Function Description Signal If the drive is to start up automatically when the line voltage is switched on (P428 = 1), a permanent high level must be provided for enabling (supply control terminal 21 with 24 V). If the "Enable right"...
Page 177
5 Parameter Value Function Description Signal ... 25 reserved for POSICON BU0210 Analog fct. Pulses that are proportional to an analog signal can be Dig.2+3 evaluated with this setting via DIN 2 and DIN 3. The function of (“0-10V”) this signal is determined in parameter P400 [-06] or [-07].
Page 178
NORDAC FLEX (SK 200E ... SK 235E) – Users Manual for Frequency Inverters Value Function Description Signal Dig. Out man/auto set Set digital output 1 manually, or via the function set in (P434) High "Set digital output manually/automatically" Dig.out manual set Set digital output 1 manually High "Set digital output manually"...
Page 179
5 Parameter Value Function Description Signal With SK 2x5 devices the variable frequency drive control unit must be supplied with power for a further 5 minutes after the last change to the motor potentiometer in order to permanently save the data. Function cannot be selected via BUS IO In Bits The operating parameter set is selected via appropriately parameterized digital inputs or BUS actuation.
Page 180
NORDAC FLEX (SK 200E ... SK 235E) – Users Manual for Frequency Inverters Pos : 455 /Anleitungen/El ektr onik /FU und Starter/5. Par ameter/Par ameter auflistung (P000 ...)/P400- P499/Param eter P426 – Sc hnell haltez eit [SK 1x 0E, SK 2xx E, SK 2xxE-FD S] @ 2\m od_1347348745067_14638.docx @ 44484 @ @ 1 Quick stop time P426 (quick stop time)
Page 181
5 Parameter Pos : 459 /Anleitungen/El ektr onik /FU und Starter/5. Par ameter/Par ameter auflistung (P000 ...)/P400- P499/Param eter P434 – Digitalausg ang F unktion [SK 2xx E] @ 38\mod_1568385949603_14638.doc x @ 2559647 @ @ 1 P434 Digital out function [-01] (Digital output function) [-02]...
Page 182
NORDAC FLEX (SK 200E ... SK 235E) – Users Manual for Frequency Inverters 17 = Comparison val. AIN2, SK 2x0E: High Setpoint AIN2 of the VFD is compared with the value in (P435[-01 or -02]). SK 2x5E: Setpoint AIN2 of 1st I/O extension is compared with value in (P435[-01]) 18 = Inverter ready: The VFD is ready for operation.
Page 183
5 Parameter Pos : 463 /Anleitungen/El ektr onik /FU und Starter/5. Par ameter/Par ameter auflistung (P000 ...)/P400- P499/Param eter P436 – Digitalausg ang Hys ter es e [SK 1x0E, SK 2xxE, SK 2xx E-FDS] @ 2\mod_1346931808547_14638.doc x @ 42836 @ @ 1 P436 Dig.
Page 184
NORDAC FLEX (SK 200E ... SK 235E) – Users Manual for Frequency Inverters Pos : 467 /Anleitungen/El ektr onik /FU und Starter/5. Par ameter/Par ameter auflistung (P000 ...)/P400- P499/Param eter P465 – Festfr equenz Fel d [SK 1x0E, SK 2xx E, SK 2x xE-FD S] @ 2\mod_1346931809249_14638.docx @ 42860 @ @ 1 P465 [-01] fixed frequency Array...
Page 185
5 Parameter Pos : 471 /Anleitungen/El ektr onik /FU und Starter/5. Par ameter/Par ameter auflistung (P000 ...)/P400- P499/Param eter P480 – Funk tion Bus I/O In Bits [SK 1x 0E, SK 2xx E] @ 2\m od_1346931810637_14638.docx @ 42908 @ @ 1 P480 [-01] Function BusIO In Bits...
Page 186
NORDAC FLEX (SK 200E ... SK 235E) – Users Manual for Frequency Inverters Pos : 474 /Anleitungen/El ektr onik /FU und Starter/5. Par ameter/Par ameter auflistung (P000 ...)/P400- P499/Param eter P480...P481 – Verw endung der Merk er @ 6\mod_1422968583767_14638.docx @ 201098 @ @ 1 P480 …...
Page 187
5 Parameter { all 10 } [-01] = Bus / AS-i Dig Out1 (Bus IO Out Bit 0 + AS-i 1) [-02] = Bus / AS-i Dig Out2 (Bus IO Out Bit 1 + AS-i 2) [-03] = Bus / AS-i Dig Out3 (Bus IO Out Bit 2 + AS-i 3) [-04] = Bus / AS-i Dig Out4 (Bus IO Out Bit 3 + AS-i 4)
Free input of a designation (name) for the device (max. 20 characters). The variable frequency A…Z (char) drive can be uniquely identified with this when working with NORD CON - software or within a { 0 } network. Pos : 481 /Anleitungen/El ektr onik /FU und Starter/5. Par ameter/Par ameter auflistung (P000 ...)/P500- P599/Param eter P502 – Wert Leitfunkti on [SK 2xx E] @ 2\m od_1346932163539_14638.docx @ 43004 @ @ 1...
Page 189
5 Parameter Pos : 483 /Anleitungen/El ektr onik /FU und Starter/5. Par ameter/Par ameter auflistung (P000 ...)/P500- P599/Param eter P503 – Leitfunkti on Ausgabe [SK 1x 0E, SK 2x xE, SK 2xx E-FDS] @ 2\mod_1346932164085_14638.docx @ 43028 @ @ 1 Leading function output P503 (master function output)
Page 190
NORDAC FLEX (SK 200E ... SK 235E) – Users Manual for Frequency Inverters Setting 16.4: Automatic load adjustment NOTE: The pulse frequency is automatically adjusted between a minimum value (highest load reserve) and a maximum value (lowest load reserve) depending on the load. During an acceleration phase and if high power is required (≥...
Page 191
NOTE: For details of the optional bus systems, please refer to the relevant supplementary bus manuals. www.nord.com Pos : 494 /Anleitungen/El ektr onik /FU und Starter/5. Par ameter/Par ameter auflistung (P000 ...)/P500- P599/Param eter P509 – Quell e Steuerwort - Ergänz ung [SK 2xx E] @ 9\m od_1448293499605_14638.docx @ 266001 @ @ 1 As an alternative to setting the parameter, systembus can also be selected with DIP switch S1:3.
Page 192
NORDAC FLEX (SK 200E ... SK 235E) – Users Manual for Frequency Inverters Pos : 498 /Anleitungen/El ektr onik /FU und Starter/5. Par ameter/Par ameter auflistung (P000 ...)/P500- P599/Param eter P512 – USS-Adres se @ 0\m od_1328092365912_14638.docx @ 15053 @ @ 1 USS address P512 (USS address)
Page 193
5 Parameter Pos : 503 /Anleitungen/El ektr onik /FU und Starter/5. Par ameter/Par ameter auflistung (P000 ...)/P500- P599/Param eter P515 – CAN- Adr ess e_01 [SK 1x 0E, SK 2x xE, SK 2xx E-FDS] @ 2\mod_1346932167813_14638.docx @ 43172 @ @ 1 P515 [-01] CAN bus address...
Page 194
NORDAC FLEX (SK 200E ... SK 235E) – Users Manual for Frequency Inverters Pos : 510 /Anleitungen/El ektr onik /FU und Starter/5. Par ameter/Par ameter auflistung (P000 ...)/P500- P599/Param eter P520 – Fangsc haltung @ 0\m od_1328092790587_14638.docx @ 15061 @ @ 1 Flying start P520 (flying start)
Page 195
5 Parameter Pos : 515 /Anleitungen/El ektr onik /FU und Starter/5. Par ameter/Par ameter auflistung (P000 ...)/P500- P599/Param eter P523 – Werks einstellung [SK 1x 0E, SK 2xx E, SK 250E-FD S] @ 59\mod_1606918747165_14638.doc x @ 2703057 @ @ 1 Factory setting P523 (factory setting)
Page 196
NORDAC FLEX (SK 200E ... SK 235E) – Users Manual for Frequency Inverters Pos : 521 /Anleitungen/El ektr onik /FU und Starter/5. Par ameter/Par ameter auflistung (P000 ...)/P500- P599/Param eter P527 – Lastüberw ac hung Freq uenz @ 0\m od_1328093197010_14638.docx @ 15067 @ @ 1 P527 [-01] Load control freq.
Page 197
5 Parameter Pos : 525 /Anleitungen/El ektr onik /FU und Starter/5. Par ameter/Par ameter auflistung (P000 ...)/P500- P599/Param eter P525...P529 – Lastüberwac hung @ 0\m od_1328093390150_14638.docx @ 15070 @ @ 1 P525 … P529 Load control With the load monitoring, a range can be specified within which the load torque may change depending on the output frequency.
Page 198
NORDAC FLEX (SK 200E ... SK 235E) – Users Manual for Frequency Inverters Pos : 527 /Anleitungen/El ektr onik /FU und Starter/5. Par ameter/Par ameter auflistung (P000 ...)/P500- P599/Param eter P533 – Faktor I2t-Motor @ 0\m od_1328093471572_14638.docx @ 15071 @ @ 1 Factor I t Motor P533...
Page 199
5 Parameter Pos : 531 /Anleitungen/El ektr onik /FU und Starter/5. Par ameter/Par ameter auflistung (P000 ...)/P500- P599/Param eter P536 – Stromgrenze [SK 1x 0E, SK 2xx E, SK 2xx E-FDS] @ 2\m od_1346932169638_14638.docx @ 43244 @ @ 1 Current limit P536 (current limit) 0.1 ...
Page 200
NORDAC FLEX (SK 200E ... SK 235E) – Users Manual for Frequency Inverters Pos : 534 /Anleitungen/El ektr onik /FU und Starter/5. Par ameter/Par ameter auflistung (P000 ...)/P500- P599/Param eter P539 – Ausgangsüberwac hung [SK 1x0E, SK 2xxE, SK 5xx E] @ 0\m od_1328093804307_14638.docx @ 15077 @ @ 1 Check output voltage P539 (output monitoring)
Page 201
5 Parameter Pos : 537 /Anleitungen/El ektr onik /FU und Starter/5. Par ameter/Par ameter auflistung (P000 ...)/P500- P599/Param eter P541 – Rel ais und digital e Ausg äng e s etz en [SK 2x xE, SK 2xx E-FDS] @ 2\m od_1346932170278_14638.docx @ 43268 @ @ 1 Set relays P541 (set digital output)
Page 202
NORDAC FLEX (SK 200E ... SK 235E) – Users Manual for Frequency Inverters Pos : 540 /Anleitungen/El ektr onik /FU und Starter/5. Par ameter/Par ameter auflistung (P000 ...)/P500- P599/Param eter P543 – Bus-Is twert 1- 3 [SK 1x0E, SK 2xxE, SK 2xx E-FDS] @ 2\mod_1346932171510_14638.doc x @ 43316 @ @ 1 P543 [-01] Bus actual value 1 ...
Page 203
5 Parameter Pos : 543 /Anleitungen/El ektr onik /FU und Starter/5. Par ameter/Par ameter auflistung (P000 ...)/P500- P599/Param eter P546 – Funk tion Bus- Sollw erte [SK 1x 0E, SK 2xx E, SK 2xx E-FDS] @ 2\m od_1346932172150_14638.docx @ 43340 @ @ 1 P546 [-01] Function bus-setpoint...
Page 204
NORDAC FLEX (SK 200E ... SK 235E) – Users Manual for Frequency Inverters Pos : 547 /Anleitungen/El ektr onik /FU und Starter/5. Par ameter/Par ameter auflistung (P000 ...)/P500- P599/Param eter P550 – EEPR OM Kopier auftr ag [SK 2xx E] @ 2\m od_1346932173382_14638.docx @ 43388 @ @ 1 EEPROM Copy Order P550 (EEPROM copy order)
Page 205
5 Parameter Pos : 550 /Anleitungen/El ektr onik /FU und Starter/5. Par ameter/Par ameter auflistung (P000 ...)/P500- P599/Param eter P553 – PLC Sollw erte [SK 1x 0E, SK 2x xE, SK 2xx E-FDS] @ 12\m od_1467294577806_14638.docx @ 335640 @ @ 1 P553 [-01] PLC set values...
Page 206
NORDAC FLEX (SK 200E ... SK 235E) – Users Manual for Frequency Inverters Pos : 552 /Anleitungen/El ektr onik /FU und Starter/5. Par ameter/Par ameter auflistung (P000 ...)/P500- P599/Param eter P555 – Leistungsbegrenz ung Chopper @ 2\mod_1346932174021_14638.doc x @ 43412 @ @ 1 P-limit chopper P555 (chopper power limit)
Page 207
5 Parameter Flux delay P558 (magnetization time) 0 / 1 / 2 ... 5000 ms The ISD control can only function correctly if there is a magnetic field in the motor. For this reason, a DC current is applied before starting the motor to provide the excitation of the stator { 1 } winding.
NORDAC FLEX (SK 200E ... SK 235E) – Users Manual for Frequency Inverters Pos : 564 /Anleitungen/El ektr onik /FU und Starter/5. Par ameter/P6xx Posi tionier ung [SK 2xxE, SK 2x xE-FD S] @ 1\mod_1346854323368_14638.docx @ 41690 @ 3 @ 1 5.2.7 Positioning Parameter group P6xx is used to adjust the positioning control or the position control.
5 Parameter Pos : 566 /Anleitungen/El ektr onik /FU und Starter/5. Par ameter/P7xx Informationen @ 0\m od_1328170311705_14638.docx @ 15102 @ 3 @ 1 5.2.8 Informations Parameter Setting value/description/note Supervisor Parameter set Pos : 567 /Anleitungen/El ektr onik /FU und Starter/5. Par ameter/Par ameter auflistung (P000 ...)/P700- P799/Param eter P700 – Ak tueller Betriebsz ustand @ 0\m od_1328170483810_14638.docx @ 15103 @ @ 1 P700 [-01] Actual operating status...
Page 210
NORDAC FLEX (SK 200E ... SK 235E) – Users Manual for Frequency Inverters Pos : 571 /Anleitungen/El ektr onik /FU und Starter/5. Par ameter/Par ameter auflistung (P000 ...)/P700- P799/Param eter P703 – Strom l etz te Störung 1...5 @ 0\m od_1328170627489_14638.docx @ 15106 @ @ 1 P703 [-01] Current.
Page 211
5 Parameter Pos : 577 /Anleitungen/El ektr onik /FU und Starter/5. Par ameter/Par ameter auflistung (P000 ...)/P700- P799/Param eter P708 – Zustand Digital eing äng e [SK 2x xE] @ 2\mod_1346932204549_14638.docx @ 43484 @ @ 1 State of digital input P708 (digital input status) 00000 ...
Page 212
NORDAC FLEX (SK 200E ... SK 235E) – Users Manual for Frequency Inverters SK 2xxE Ext. Al 1 2. IOE, "External analog input 1 2nd IOE", AIN1 of the second I/O extension [-08] = (SK xU4-IOE) (= analog input 3) Ext.
Page 213
5 Parameter P718 [-01] Current setpoint frequency (present setpoint frequency) [-03] -400.0 ... 400.0 Hz Displays the frequency specified by the setpoint (please see chapter 8.1 "Setpoint processing"). [-01] = present setpoint frequency from the setpoint source [-02] = present setpoint frequency after processing in the VFD status machine [-03] = present setpoint frequency after frequency ramp Pos : 590 /Allgem ein/Allgem eingültig e Module/---------Seitenumbr uc h k ompakt --------- @ 13\m od_1476369695906_0.doc x @ 2265496 @ @ 1 Pos : 591 /Anleitungen/El ektr onik /FU und Starter/5.
Page 214
NORDAC FLEX (SK 200E ... SK 235E) – Users Manual for Frequency Inverters Input voltage P728 (input voltage) 0 ... 1000 V Displays the actual line voltage at the VFD input. This is determined indirectly from the value of the DC link voltage. Pos : 602 /Anleitungen/El ektr onik /FU und Starter/5.
Page 215
5 Parameter Dc. link voltage P736 (DC link voltage) 0 ... 1000 V DC Displays the actual DC link voltage. Pos : 612 /Anleitungen/El ektr onik /FU und Starter/5. Par ameter/Par ameter auflistung (P000 ...)/P700- P799/Param eter P736 – Zwisc henkreis spannung _Ergänz ung Anzeige klei ner Wert bei 24V_Geräten [SK 2x xE] @ 5\mod_1397202429585_14638.docx @ 126260 @ @ 1 Information Display of untypical value In devices with a separate 24 V supply, a small, non-typical value is displayed if no line voltage...
Page 216
NORDAC FLEX (SK 200E ... SK 235E) – Users Manual for Frequency Inverters Pos : 619 /Anleitungen/El ektr onik /FU und Starter/5. Par ameter/Par ameter auflistung (P000 ...)/P700- P799/Param eter P741 – Pr ozessdaten Bus Out [SK 1x 0E, SK 2xx E, SK 500...535E, SK 2xx E-FDS] @ 0\m od_1328177890266_14638.docx @ 15148 @ @ 1 P741 [-01] PZD bus Out...
Page 217
5 Parameter Pos : 623 /Anleitungen/El ektr onik /FU und Starter/5. Par ameter/Par ameter auflistung (P000 ...)/P700- P799/Param eter P744 – Aus baustufe [SK 1x 0E, SK 2xx E, SK 2xxE-FD S] @ 2\m od_1346932209541_14638.docx @ 43676 @ @ 1 Configuration level P744 (configuration level)
Page 218
NORDAC FLEX (SK 200E ... SK 235E) – Users Manual for Frequency Inverters Pos : 628 /Anleitungen/El ektr onik /FU und Starter/5. Par ameter/Par ameter auflistung (P000 ...)/P700- P799/Param eter P749 – Zustand DIP-Schalter [SK 2xx E] @ 2\m od_1346932210882_14638.docx @ 43724 @ @ 1 Status DIP-switches P749 (Status of DIP switches)
Page 219
5 Parameter Pos : 635 /Anleitungen/El ektr onik /FU und Starter/5. Par ameter/Par ameter auflistung (P000 ...)/P700- P799/Param eter P755 – Statistik Systemfehler @ 0\mod_1328178677434_14638.docx @ 15162 @ @ 1 Stat. System error P755 (system faults statistics) 0 ... 9999 Number of system faults during the operating period P714.
If the device is in the status "Not Ready" or "Start Disabled", the reason for this is indicated in the third array element of parameter (P700). Display is only possible with the NORD CON software or the Parameter Box (SK PAR-3H). Warning messages (P700 [-02]) Warning messages are generated as soon as a defined limit is reached.
6 Operating status messages Pos : 645 /Anleitungen/El ektr onik /FU und Starter/6. M eldung en zum Betriebsz ustand/Dars tell ung der Mel dungen @ 3\mod_1361802708455_14638.doc x @ 59828 @ 2 @ 1 6.1 Display of messages Pos : 646 /Anleitungen/El ektr onik /FU und Starter/6. M eldung en zum Betriebsz ustand/Dars tell ung der Mel dungen - LED Anz eigen @ 3\m od_1361796228478_14638.docx @ 59714 @ 5 @ 1 LED displays The device status is indicated by integrated and externally visible status LEDs included in the factory default kit.
NORDAC FLEX (SK 200E ... SK 235E) – Users Manual for Frequency Inverters Pos : 651 /Anleitungen/El ektr onik /FU und Starter/6. M eldung en zum Betriebsz ustand/Diagnos e LED s/Diag nos e- LEDs am SK 2x0E ( BG 1 … 3) [SK 2xx E] @ 1\m od_1343203939163_14638.docx @ 36987 @ 35 @ 1 6.2.1 Diagnostic LEDs on SK 2x0E (size 1 …...
6 Operating status messages Pos : 653 /Anleitungen/El ektr onik /FU und Starter/6. M eldung en zum Betriebsz ustand/Diagnos e LED s/Diag nos e- LEDs am SK 2x0E ( BG 4) und SK 2x5E [SK 2xxE] @ 2\mod_1350999163928_14638.doc x @ 49243 @ 355 @ 1 6.2.2 Diagnostic LEDs on the SK 2x0E (size 4) and SK 4x5E SK 2x5E 1 RJ12,...
Page 224
NORDAC FLEX (SK 200E ... SK 235E) – Users Manual for Frequency Inverters Diagnostic LEDs Signal Name Color Description Status Meaning DOUT 1 yellow Digital output 1 High signal applied DIN 1 yellow Digital input 1 High signal applied DIN 2 yellow Digital input 2 High signal applied...
6 Operating status messages Pos : 655 /Anleitungen/El ektr onik /FU und Starter/6. M eldung en zum Betriebsz ustand/Mel dungen @ 3\m od_1361803071259_14638.docx @ 59852 @ 2 @ 1 6.3 Messages Pos : 656 /Anleitungen/El ektr onik /FU und Starter/6. M eldung en zum Betriebsz ustand/Störm eldung en (Tabell enübersc hrift) @ 3\m od_1361803456862_14638.docx @ 59894 @ 5 @ 1 Error messages Display in the Simple Box/Control Box...
Page 226
NORDAC FLEX (SK 200E ... SK 235E) – Users Manual for Frequency Inverters Pos : 660 /Anleitungen/El ektr onik /FU und Starter/6. M eldung en zum Betriebsz ustand/Störm eldung en (Auflistung)/F ehl er E003 [SK 180E/SK 2x xE/SK 5xxE/SK2xxE-FD S] @ 2\m od_1347453304788_14638.docx @ 46477 @ @ 1 E003 t overcurrent limit a.c.
Page 227
6 Operating status messages Pos : 665 /Anleitungen/El ektr onik /FU und Starter/6. M eldung en zum Betriebsz ustand/Störm eldung en (Auflistung)/F ehl er E007 [SK 500P, SK 180E, SK 200E(-FDS), SK500E] @ 58\m od_1606137730820_14638.docx @ 2694962 @ @ 1 E007 Mains phase failure Fault on supply connection side...
Page 228
NORDAC FLEX (SK 200E ... SK 235E) – Users Manual for Frequency Inverters Pos : 670 /Anleitungen/El ektr onik /FU und Starter/6. M eldung en zum Betriebsz ustand/Störm eldung en (Auflistung)/F ehl er E010 [SK 180E/SK 2x xE/SK2x xE-FD S] @ 40\mod_1575965968975_14638.docx @ 2581241 @ @ 1 E010 10.0 Bus timeout...
Page 229
6 Operating status messages 12.4 Current limit Limit from potentiometer or setpoint source has switched off. P400 = 14 12.5 Load monitor Switch-off due to overshooting or undershooting of permissible load torques ((P525) … (P529)) for the time set in (P528). •...
Page 230
NORDAC FLEX (SK 200E ... SK 235E) – Users Manual for Frequency Inverters • Check motor connection 19.1 Star/delta incorrect "Motor star/delta circuit • Check preset motor data (P201 … P209) incorrect" • PMSM – CFC Closed Loop Operation: Rotor position of motor incorrect in relation to incremental encoder Determine rotor position (initial enable after a "Power On"...
Page 231
6 Operating status messages Pos : 687 /Anleitungen/El ektr onik /FU und Starter/6. M eldung en zum Betriebsz ustand/War nmel dungen (T abellenübersc hrift) @ 3\mod_1361803463080_14638.docx @ 59918 @ 5 @ 1 Warning messages Display in the Simple Box/Control Box Warning Cause Text in the Parameter Box •...
Page 232
NORDAC FLEX (SK 200E ... SK 235E) – Users Manual for Frequency Inverters Pos : 692 /Anleitungen/El ektr onik /FU und Starter/6. M eldung en zum Betriebsz ustand/Störm eldung en (Auflistung)/W arnung C 004 [SK 180E ... SK 5x xE/SK 500P] @ 2\mod_1347457006705_14638.doc x @ 47225 @ @ 1 C004 Overcurrent measurem Warning: pulse switch off is active...
Page 233
Pos : 703 /Anleitungen/El ektr onik /FU und Starter/6. M eldung en zum Betriebsz ustand/Störm eldung en (Auflistung)/Information - Kennzeic hnung "Nic ht ber eit" @ 20\mod_1513067472948_14638.docx @ 2375119 @ @ 1 Indication of operating mode (message) on the Parameter Box or virtual operating unit of the NORD CON-Software: "Not ready"...
NORDAC FLEX (SK 200E ... SK 235E) – Users Manual for Frequency Inverters 6.4 FAQ operational problems Fault Possible cause Remedy Pos : 706 /Anleitungen/El ektr onik /FU und Starter/6. M eldung en zum Betriebsz ustand/Betriebss tör ung en (Auflistung)/F AQ Betriebss tör ung en_01 [SK 1x 5E, SK 2xx E] @ 9\m od_1448963514987_14638.docx @ 268903 @ @ 1 •...
6 Operating status messages Pos : 713 /Anleitungen/El ektr onik /FU und Starter/6. M eldung en zum Betriebsz ustand/Betriebss tör ung en (Auflistung)/F AQ Betriebss tör ung en_07 [SK 2xx E] @ 9\m od_1448963477551_14638.docx @ 268672 @ @ 1 • Check P400 Motor speed does not •...
NORDAC FLEX (SK 200E ... SK 235E) – Users Manual for Frequency Inverters 7 Technical Data Pos : 719 /Anleitungen/El ektr onik /FU und Starter/7. T ec hnisc he D aten/Allgem eine D aten Frequenzumric hter (mit Ü bersc hrift) [SK 1x 0E, SK 2xx E] @ 58\mod_1606205942262_14638.doc x @ 2695435 @ 2 @ 1 7.1 General data for variable frequency drive Function Specification...
The measurement series were made at the rated speed with 4-pole NORD standard motors The following factors have a particular influence on the determined limiting values: Wall mounting •...
NORDAC FLEX (SK 200E ... SK 235E) – Users Manual for Frequency Inverters Pos : 723 /Anleitungen/El ektr onik /FU und Starter/7. T ec hnisc he D aten/El ektrisc he Daten [SK 1xxE, SK 2xx E, SK xx xE-FD S]/Elek trische D aten 1~ 115V [SK 2xx E] @ 20\mod_1513683452174_14638.doc x @ 2376248 @ 3 @ 1 7.2.1 Electrical data 1~115 V Device model SK 2x5E…...
7 Technical Data Pos : 725 /Anleitungen/El ektr onik /FU und Starter/7. T ec hnisc he D aten/El ektrisc he Daten [SK 1xxE, SK 2xx E, SK xx xE-FD S]/Elek trische D aten 1~ 230V [SK 2xx E] @ 20\mod_1513681007895_14638.doc x @ 2376212 @ 3 @ 1 7.2.2 Electrical data 1~230 V Device model SK 2xxE…...
NORDAC FLEX (SK 200E ... SK 235E) – Users Manual for Frequency Inverters Pos : 727 /Anleitungen/El ektr onik /FU und Starter/7. T ec hnisc he D aten/El ektrisc he Daten [SK 1xxE, SK 2xx E, SK xx xE-FD S]/Elek trische D aten 3~ 230V [SK 2xx E] @ 20\mod_1513680377732_14638.doc x @ 2376176 @ 3 @ 1 7.2.3 Electrical data 3~230 V Device model SK 2xxE…...
Page 241
7 Technical Data Device model SK 2xxE… -151-323- -221-323- -301-323- -401-323- Size 230 V 1.5 kW 2.2 kW 3.0 kW 4.0 kW Rated motor power (4-pole standard motor) 240 V 2 hp 3 hp 4 hp 5 hp 3 AC 200 … 240 V, ± 10%, 47 … 63 Hz Line voltage 230 V 6.6 A...
Page 242
NORDAC FLEX (SK 200E ... SK 235E) – Users Manual for Frequency Inverters Device model SK 2xxE… -551-323- -751-323- -112-323- Size 230 V 5.5 kW 7.5 kW 11.0 kW Rated motor power (4-pole standard motor) 240 V 7 ½ hp 10 hp 15 hp 3 AC 200 …...
7 Technical Data Pos : 729 /Anleitungen/El ektr onik /FU und Starter/7. T ec hnisc he D aten/El ektrisc he Daten [SK 1xxE, SK 2xx E, SK xx xE-FD S]/Elek trische D aten 3~ 400V [SK 2xx E] @ 20\mod_1513672338674_14638.doc x @ 2376140 @ 3 @ 1 7.2.4 Electrical data 3~400 V Device model SK 2xxE…...
Page 244
NORDAC FLEX (SK 200E ... SK 235E) – Users Manual for Frequency Inverters Device model SK 2xxE… -301-340- -401-340- -551-340- -751-340- Size 400 V 3.0 kW 4.0 kW 5.5 kW 7.5 kW Rated motor power (4-pole standard motor) 480 V 4 hp 5 hp 7 ½...
Page 245
7 Technical Data Device model SK 2xxE… -112-340- -152-340- -182-340- -222-340- Size 400 V 11.0 kW 15.0 kW 18.5 kW 22.0 kW Rated motor power (4-pole standard motor) 480 V 15 hp 20 hp 25 hp 30 hp Line voltage 400 = 0 –...
8 Additional information Pos : 734 /Anleitungen/El ektr onik /FU und Starter/8. Z us atzi nform ati onen/Pr oz essregler /Pr ozes sregler [SK 1x0E, SK 2xx E, SK 2x xE-FD S] @ 2\m od_1347524545007_14638.docx @ 47500 @ 2 @ 1 8.2 Process controller The process controller is a PI controller which can be used to limit the controller output.
NORDAC FLEX (SK 200E ... SK 235E) – Users Manual for Frequency Inverters Pos : 736 /Anleitungen/El ektr onik /FU und Starter/8. Z us atzi nform ati onen/Pr oz essregler /Anwendungsbeis piel Proz essr egler [SK 1x0E, SK 2xxE, SK 5xx E/P, SK 2xxE-FD S] @ 0\m od_1328186990203_14638.docx @ 15184 @ 3 @ 1 8.2.1 Process controller application example Controlled drive via CR Compensating roller = CR (dancer roller)
8 Additional information Pos : 738 /Anleitungen/El ektr onik /FU und Starter/8. Z us atzi nform ati onen/Pr oz essregler /Param eterei nstellungen Pr oz essregl er [SK 1x 0E, SK 2xx E, SK 2xx E-FDS] @ 2\m od_1347442621498_14638.docx @ 46084 @ 3 @ 1 8.2.2 Process controller parameter settings (Example: SK 2x0E Setpoint frequency: 50 Hz, control limits: +/- 25%)
8 Additional information Pos : 740.5 /Anleitungen/El ektr onik /FU und Starter/8. Z usatzinform ati onen/EM V/Beurteilung der EMV [Umrichter] @ 5\m od_1396880765461_14638.docx @ 124671 @ 3 @ 1 8.3.2 EMC evaluation Two standards must be observed when evaluating electromagnetic compatibility. 1.
NORDAC FLEX (SK 200E ... SK 235E) – Users Manual for Frequency Inverters Pos : 740.7 /Anleitungen/El ektr onik /FU und Starter/8. Z usatzinform ati onen/EM V/_EM V des Gerätes_01 (Übersc hrift) [SK 1x xE, SK 2xx E, SK 5xxE, SK xxx E-FDS] @ 19\m od_1511875338425_14638.docx @ 2373963 @ 3 @ 1 8.3.3 EMC of device Pos : 740.8 /Anleitungen/El ektr onik /FU und Starter/1.
8 Additional information Pos : 740.12 /Anl eitungen/Elektronik/FU und Starter/8. Zus atzinformationen/EMV/_EMV des Gerätes _ Grenzw ertkl ass en @ 2\m od_1347443407776_14638.docx @ 46108 @ @ 1 EMC Overview of standards which as per EN 61800-3 are used as test and measuring methods: Emitted interference Cable-related emission EN 55011...
8 Additional information Pos : 742.1 /Anleitungen/El ektr onik /FU und Starter/8. Z usatzinform ati onen/Reduzierte Ausgangsleistung/Reduzierte Ausg angsl eistung @ 48\mod_1596792688545_14638.docx @ 2659333 @ 2 @ 1 8.4 Reduced output power The variable frequency drives are designed for specific overload situations. For example, 1.5x overcurrent can be used for 60 s.
NORDAC FLEX (SK 200E ... SK 235E) – Users Manual for Frequency Inverters Pos : 742.4 /Anleitungen/El ektr onik /FU und Starter/8. Z usatzinform ati onen/Reduzierte Ausgangsleistung/_R eduzi erter Überstrom aufgrund der Z eit @ 0\m od_1328188764173_14638.docx @ 15190 @ 3 @ 1 8.4.2 Reduced overcurrent due to time The possible overload capacity changes depending on the duration of an overload.
8 Additional information Pos : 742.6 /Anleitungen/El ektr onik /FU und Starter/8. Z usatzinform ati onen/Reduzierte Ausgangsleistung/_R eduzi erter Überstrom aufgrund der Ausgangsfrequenz @ 37\mod_1564730396586_14638.docx @ 2555100 @ 3 @ 1 8.4.3 Reduced overcurrent due to output frequency To protect the power unit at low output frequencies (<4.5 Hz), a monitoring system is provided with which the temperature of the IGBTs (insulated-gate bipolar transistor) due to high current is determined.
NORDAC FLEX (SK 200E ... SK 235E) – Users Manual for Frequency Inverters 8.4.4 Reduced output current due to line voltage The devices are designed with thermal characteristics according to the nominal output currents. Accordingly, for lower line voltages, higher currents cannot be taken off in order to maintain the stated power constant.
8 Additional information Pos : 744 /Anleitungen/El ektr onik /FU und Starter/8. Z us atzi nform ati onen/Reduzierte Ausgangsleistung/_R eduzi erter Ausgangsstr om aufgrund der Dr ehzahl [SK 2xxE] @ 6\mod_1429263361868_14638.doc x @ 212108 @ 3 @ 1 8.4.6 Reduced output current due to speed Size 1 –...
NORDAC FLEX (SK 200E ... SK 235E) – Users Manual for Frequency Inverters Pos : 746 /Anleitungen/El ektr onik /FU und Starter/8. Z us atzi nform ati onen/Betri eb am FI-Sc hutzsc halter [SK 2xx E] @ 19\mod_1506075324969_14638.docx @ 2366183 @ 2 @ 1 8.5 Operation on the VFD circuit breaker With SK 2xxE variable frequency drives (except 115 V devices), leakage currents of >...
8 Additional information Pos : 748 /Anleitungen/El ektr onik /FU und Starter/8. Z us atzi nform ati onen/Systembus [SK 1x 0E, SK 2xx E] @ 2\m od_1347445356391_14638.docx @ 46180 @ 25555 @ 1 8.6 System bus The device and many of the associated components communicate with each other via the system bus. This bus system is a CAN bus with CANopen protocol.
Page 262
NORDAC FLEX (SK 200E ... SK 235E) – Users Manual for Frequency Inverters Physical structure Standard 2x2, twisted pair, shielded, stranded wires, wire cross-section ≥0.25 mm² (AWG23), Physical design surge impedance approx. 120 Ω max. 20 m total network Bus length max.
Page 263
8 Additional information Example of variable frequency drive addressing Variable Addressing via DIP switch S1 Resulting node ID Node ID AG Frequency Drives DIP 2 DIP 1 Variable Frequency Drives VFD1 VFD2 VFD3 VFD4 Pos : 749 /Anleitungen/El ektr onik /FU und Starter/8. Z us atzi nform ati onen/Systembus _Ergänz ung_Information - C ANopen AG [SK 2x xE] @ 5\m od_1397120446073_14638.docx @ 126201 @ @ 1 Information CANopen absolute encoders In applications with CANopen absolute encoders, the encoders must be assigned to the relevant VFD via the...
Pos : 753 /Anleitungen/El ektr onik /FU und Starter/8. Z us atzi nform ati onen/Energieeffizienz _02 [SK 1x 0E, SK 2xx E, SK 5xxE, SK 2xx E-FDS] @ 19\m od_1511882035669_14638.docx @ 2374176 @ @ 1 NORD variable frequency drives have low power consumption and are therefore highly efficient. In...
8 Additional information Pos : 755 /Anleitungen/El ektr onik /FU und Starter/8. Z us atzi nform ati onen/Motor daten Kennlini en [SK 1x 0E, SK 2x 0E]/M otordaten - Kennlini en (Übersc hrift + Einl eitung) @ 2\mod_1347446725228_14638.doc x @ 46229 @ 2 @ 1 8.8 Motor data - characteristic curves The possible characteristic curves with which the motors can be operated are explained in the following.
Page 266
NORDAC FLEX (SK 200E ... SK 235E) – Users Manual for Frequency Inverters Pos : 758 /Anleitungen/El ektr onik /FU und Starter/8. Z us atzi nform ati onen/Motor daten Kennlini en [SK 1x 0E, SK 2x 0E]/50Hz Kennli nie_Tabellen [SK 2xxE] @ 6\mod_1429275789250_14638.docx @ 212301 @ @ 1 115 V/230 V variable frequency drive With 115 V devices, the input voltage is doubled is doubled inside the device so that the required maximum output voltage of 230 V is achieved by the device.
Page 267
8 Additional information 400 V variable frequency drive The following data is based on an output of 2.2 kW using a 230/400 V motor winding. 400/690 V windings are used for 3 kW and higher. They apply to IE1 and IE2 motors. It should be noted that these details may deviate slightly as motors are subject to certain manufacturing tolerances.
NORDAC FLEX (SK 200E ... SK 235E) – Users Manual for Frequency Inverters Pos : 760 /Anleitungen/El ektr onik /FU und Starter/8. Z us atzi nform ati onen/Motor daten Kennlini en [SK 1x 0E, SK 2x 0E]/87Hz Kennli nie [SK 1x 0E, SK 2xx E] @ 2\m od_1347450038971_14638.docx @ 46325 @ 3 @ 1 8.8.2 87 Hz characteristic curve (only 400 V devices) (...
Page 269
8 Additional information Variable Parameterization data of variable frequency drive Motor Frequency (IE2) Drive [Nm] cos ϕ Y/Δ [Ω] SK … [Hz] [rpm] [kW] SK 2xxE-… Δ 80SH/4 111-340-A 3.73 1415 2.39 0.55 9.34 Δ 80LH/4 151-340-A 5.06 1410 3.12 0.75 0.75 6.30...
NORDAC FLEX (SK 200E ... SK 235E) – Users Manual for Frequency Inverters Pos : 763 /Anleitungen/El ektr onik /FU und Starter/8. Z us atzi nform ati onen/Motor daten Kennlini en [SK 1x 0E, SK 2x 0E]/100Hz Kennlini e [SK 1x0E, SK 2xxE] @ 2\mod_1347450982002_14638.doc x @ 46349 @ 3 @ 1 8.8.3 100 Hz characteristic curve (only 400 V devices) (...
Page 271
8 Additional information Variable Parameterization data of variable frequency drive Motor Frequency (IE2) Drive [Nm] cos ϕ Y/Δ [Ω] SK … [Hz] [rpm] [kW] SK 2xxE-… Δ 80SH/4 750-340-A 2.44 2930 0.75 9.34 Δ 80LH/4 111-340-A 3.60 2920 2.56 0.73 Δ...
NORDAC FLEX (SK 200E ... SK 235E) – Users Manual for Frequency Inverters Pos : 766 /Anleitungen/El ektr onik /FU und Starter/8. Z us atzi nform ati onen/Normi erung Soll- / Istw erte_01 [SK 1x 0E, SK 2xx E, SK 2xx E-FDS] @ 22\m od_1528960072497_14638.docx @ 2427020 @ 2 @ 1 8.9 Standardization of setpoint/target values The following table contains details for the standardization of typical setpoint and actual values.
8 Additional information Pos : 769 /Anleitungen/El ektr onik /FU und Starter/8. Z us atzi nform ati onen/Definiti on Soll- und Istw ert- Verar bei tung (Frequenzen) [SK 1x0E, SK 2xxE, SK 5xx E, SK 2xx E-FDS] @ 0\m od_1328189429815_14638.docx @ 15197 @ 2 @ 1 8.10 Definition of setpoint and actual value processing (frequencies) The frequencies used in parameters (P502) and (P543) are processed in various ways according the following table.
NORDAC FLEX (SK 200E ... SK 235E) – Users Manual for Frequency Inverters 9 Maintenance and servicing information Pos : 772 /Anleitungen/El ektr onik /FU und Starter/9. W artungs- und Servic ehi nw eise/Wartungs hinw eis e [SK 1x 0E, SK 2xxE, SK 5xx E] @ 2\m od_1347439895316_14638.docx @ 46011 @ 255 @ 1 9.1 Maintenance Instructions When used as intended, variable frequency drives are maintenance-free(please see chapter 7 "Technical Data").
(P707) and the series number (name plate) at hand. The device must be sent to the following address if it needs repairing: NORD Electronic DRIVESYSTEMS GmbH Tjüchkampstrasse 37 D-26605 Aurich Please remove all non-original parts from the device.
DIP switch 1 … EEPROM Non-volatile memory Software version, P707 Electromotive force (induction voltage) Technical information/data sheet (data sheet for NORD accessories) Electromagnetic compatibility Voltage flux control (current-controlled, field-oriented control) === Ende der Liste für T extm arke Inhalt === BU 0200 en-US-4920...
Page 277
Key word index Pos : 781 /Allgem ein/Steuerm odule/Stichw ortv erzeic hnis @ 0\mod_1317978518730_14638.docx @ 14772 @ @ 1 Key word index === Ende der Liste für T extm arke Stichw ortv erzeic hnis === Automatic start (P428) ........ 180 "...
Page 278
NORDAC FLEX (SK 200E ... SK 235E) – Users Manual for Frequency Inverters COPY ............112 Dynamic braking ........... 53 Copy function ..........112 Copy parameter set (P101) ......141 EAC Ex ......... 25, 28, 45, 76, 83 CSA ............. 237 Certificate ..........
Page 279
Key word index Field weakening controller P (P318) ... 160 ISD control ..........154 Field weakening limit (P320) ....... 160 Filters Jog frequency (P113)........147 Analog output 1 (P418) ......174 Fixed frequency array (P465) ...... 184 KTY84-130 ..........117 Fixed frequency mode (P464) .....
Page 280
NORDAC FLEX (SK 200E ... SK 235E) – Users Manual for Frequency Inverters Master function output (P503) ..... 189 Option monitoring (P120) ......147 Master function value (P502)....... 188 Optional (mounting) slots ......49 Max. freq. a-in 1/2 (P411) ......172 Oscillation damping (P217) ......
Page 281
Key word index Power limitation ........... 255 Reason VFD blocked (P700) ...... 209 Power-up cycles .......... 236 Reduced output power ........ 255 Present Relay cos phi (P725) .......... 213 set (P541) ..........201 current (P719) .......... 213 Reluct. angle IPMSM (P243) ...... 156 fault (P700) ..........
Page 282
NORDAC FLEX (SK 200E ... SK 235E) – Users Manual for Frequency Inverters Rated/actual values ......... 272 Three-phase standard motor ...... 148 Standardization Time watchdog (P460) ........ 183 Analog output 1 (P419) ......175 Toroidal core ..........40 Bus I/O Out Bits (P482) ......186 Torque State of relays (P711) ........
Need help?
Do you have a question about the NORDAC FLEX SK 200E Series and is the answer not in the manual?
Questions and answers