Table of Contents
Advertisement
NORDAC FLEX (SK 200E ... SK 235E) – Users Manual for Frequency Inverters
Details of DIP switch S1: 5/4 and 3
Applies to devices SK 20xE, SK 21xE (without on-board AS interface)
DIP
Functions as per the list of digital functions (P420)
5
4
3
Dig 1
P420 [01]*{01}
off off off
"Enable R"
off on off
{01} "Enable R"
on off off
{45} "3-on"
{50} "F Arr Bit0"
on on off
=5Hz (P465[01])
The functions of the digital inputs are inactive (control via system bus) but the settings
entered in the parameters (P420 [01 ... 04]) for functions designated with ..² in the
function list (e.g.: {11}²= "quick stop") result in the activation of the correspondingly
parameterized input.
off off on
P420 [01]
no function
{14} "Remote
off on on
control"
{14} "Remote
on off on
control"
{14} "Remote
on on on
control"
Explanation: (values underlined in brackets) = (relevant parameter/source of function), e.g.: Parameter (P420[01])
{curly brackets}
* Default setting
** only if present (devices without "safe stop" function)
*** only with SK 2x5E
Applies to devices SK 22xE, SK 23xE (without AS interface on board)
DIP
Functions as per the list of digital functions (P420)
ASi
5
4
3
In1
P480 [01]*{01}
off off off
"Enable R"
{04} "Fixed
off on off
freq. 1"
=5 Hz
(P465[01])
{01} "Enable
on off off
R"
{51} "F Arr B1"
on on off
=10 Hz (P465[02])
The functions of the ASI-In bits are inactive (control via system bus) but
the settings entered in the parameters (P480 [01 ... 04]) for functions
designated with ..² in the function list (e.g.: {11}²= "quick stop") result in
the activation of the correspondingly parameterized bit
off off on
P480 [01]
no
function
{14} "Remote
off on on
control"
{14} "Remote
on off on
control"
{14} "Remote
on on on
control"
Explanation: See table above
Note:
The functions of potentiometers*** P1 and P2 correspond to those of devices without an AS interface (see table above).
With DIP switches 5 and 4 in the OFF position (default setting), the digital inputs are also active. The functions then correspond to those of devices
without an AS interface (table above). In all other DIP switch combinations the functions of the digital inputs are deactivated.
ASi OUT1 and ASi OUT2 loop the signal level (High/Low) of digital inputs 1 and 2.
Pos : 241 /Allgem ein/Allgem eingültig e Module/---------Seitenumbr uc h k ompakt --------- @ 13\m od_1476369695906_0.doc x @ 2265496 @ @ 1
108
Dig 2
Dig 3
P420 [03]*
P420 [02]*{02}
{04} "fixed freq 1"
"Enable L"
=5 Hz (P465[01])
{26} "F
{02} "Enable L"
setpoint"***
{49} "3-off"
{47} "Freq. +"
{51} "F Arr Bit1"
{52} "F Arr Bit2"
=10 Hz (P465[02])
=20 Hz (P465[03])
P420 [03]
P420 [02]
{04} "fixed freq1"
no function
=5 Hz (P465[01])
"Encoder track A" "Encoder track B" {01} "Enable R"
{01} "Enable R"
{10} "Block"
{51} "F Arr Bit1"
{52} "F Arr Bit2"
=10 Hz (P465[02])
=20 Hz (P465[03])
= {function} e.g.: {01} "Enable right"
ASi
ASi
In2
In3
P480 [03]*{04}
P480 [02]*{02}
"Fixed freq. 1"
"Enable L"
=5 Hz (P465[01])
{05} "Fixed
{06} "Fixed
freq. 2"
freq. 3"
=10 Hz
=20 Hz
(P465[02])
(P465[03])
{02} "Enable
{47} "Freq. +"
L"
{52} "F Arr B2"
{53} "F Arr B3"
=20 Hz (P465[03])
=35Hz (P465[04])
P480
[03]
{04}
P480 [02]
"Fixed freq.
no function
1"
=5 Hz
(P465[01])
{04} "Fixed
{05} "Fixed
freq. 1"
freq. 2"
=5 Hz
=10 Hz
(P465[01])
(P465[02])
{01} "Enable
{47} "Freq. +"
R"
{50} "F Arr B0"
{51} "F Arr B1"
=5Hz (P465[01])
=10 Hz (P465[02])
Dig 4**
P420 [04]*
{05} "fixed freq 2"
=10 Hz (P465[02])
{12} "Quit"
{48} "Freq. -"
{53} "F Arr Bit3"
=35 Hz (P465[04])
P420 [04]
{05} "fixed freq2"
=10 Hz (P465[02])
{66} "Release
brake"
{53} "F Arr Bit3"
=35 Hz (P465[04])
Functions as per the list of digital outputs
ASi
ASi
In4
Out1
P480 [04]*{12}
P481 [01]*
"Quit"
{07} "Error"
{07} "Fixed
{07} "Error" {18} "Ready" "DigIn1"
freq. 4"
=35 Hz
(P465[04])
{48} "Freq. -"
{07} "Error" {18} "Ready" "DigIn1"
{14} "Remote
{07} "Error" {18} "Ready" "DigIn1"
control"
P481
[01]{07}
"Error"
P480 [04]{12}
"Quit"
{06} "Fixed
{07} "Error" {18} "Ready" "DigIn1"
freq. 3"
=20 Hz
(P465[03])
"Freq. -"
{07} "Error" {18} "Ready" "DigIn1"
{48}
{52} "F Arr B2"
{07} "Error" {18} "Ready" "DigIn1"
=20Hz (P465[03])
Functions as per the list of
analog functions (P400)
Poti 1***
Poti 2***
P400 [01]*
P400 [02]*
{01} "F
{15} "ramp"
setpoint"
{05} "F max"
{04} "F min"
{05} "F max"
{15} "Ramp"
{05} "F max"
{15} "Ramp"
P400 [01]
P400 [02]
{01} "F
{15} "ramp"
setpoint"
{01} "F
{05} "F max"
setpoint"
{01} "F
{05} "F max"
setpoint"
{05} "F max"
{15} "Ramp"
(P434)
ASi
ASi
ASi
Out2
Out3
Out4
P481 [02]*
"DigIn1"
"DigIn2"
{18} "Ready"
"DigIn2"
"DigIn2"
"DigIn2"
P481
[02]{18}
"DigIn1"
"DigIn2"
"Ready"
"DigIn2"
"DigIn2"
"DigIn2"
BU 0200 en-US-4920
Advertisement
Table of Contents
