Replacing The Pyrolyzer Heater - Thermo Scientific SOLA II Flare User Manual

Replacing the
Pyrolyzer Heater
Thermo Scientific
3. Tighten the fittings that connect the tubing to the mixing chamber.
4. Restart the system.
Warning The pyrolyzer can be extremely hot, even after power is turned off.
Use extreme care to prevent burns. ▲
The pyrolyzer heater is enclosed in the pyrolyzer housing, which is shown in the
figure below.
Figure 8-2. Pyrolyzer housing
Maintenance & Troubleshooting
SOLA II Flare User Manual
Chapter 8
8-8