Calibration Setup; Manually Calibrating A Low Value; Manually Calibrating A High Value - Thermo Scientific SOLA II Flare User Manual

Calibration Setup

Manually Calibrating a
Low Value
Manually Calibrating a
High Value
Thermo Scientific
With this option, you will need to configure each calibration (Cal A and Cal B)
independently. Both Cal A and Cal B have recalibrate functions, but the
function only operates with the currently-running Cal selection. The
Calibration Setup menu consists of parameters for Cal A and Cal B. Cal A
items appear first.
Table 5-1. Calibration parameters
Cal A
Cal A Inject Valve (V1 or V2)
Cal A High Value
Cal A Low Value
Recalibrate A High
Recalibrate A Low
Adjust A Reading
High Cal A KHz
Low Cal A KHz
1. Manipulate gases via the SCS Valve Select menu to allow the Range A
or Range B Low calibration standard to flow into instrument.
2. Watch the instrument's display and wait for the sulfur value to stabilize.
3. Access the Configuration Menu on the SOLA II Flare's display.
4. Access the Calibration Setup Menu.
5. Select Recalibrate Low.
6. Total sulfur content will appear on the display.
7. The phrase Recalibrate Low? will appear on the display.
8. Press the Yes button.
9. Manipulate the valve on the sample conditioning system to allow the
sample to once again flow into the instrument.
1. Manipulate gases via the SCS Valve Select menu to allow the Range A
or Range B High calibration standard to flow into instrument.
2. Watch the instrument's LCD and wait for the sulfur value to stabilize.
3. Access the Configuration Menu on the SOLA II Flare's display.
4. Access the Calibration Setup Menu.
5. Select Recalibrate High.
6. Total sulfur content will appear on the display.
7. The phrase Recalibrate High? will appear on the display.
Cal B
Cal B Inject Valve
Cal B High Value
Cal B Low Value
Recalibrate B High
Recalibrate B Low
Adjust B Reading
High Cal B KHz
Low Cal B KHz
SOLA II Flare User Manual
Chapter 5
Configuration
5-11