Workstation Operation - Thermo Scientific SOLA II Flare User Manual

Workstation
Operation
Thermo Scientific
b. Set the identifier to 1.
6. If a serial port is used for the connection, configure the serial port
parameters as follows:
a. Select Lookout Options > Serial Ports.
b. Verify that the port is configured as shown in Figure E–3.
Note The specified Receive gap, RTS delay, and CTS time-out are critical to
achieve successful communication with the analyzer. Depending on the PC
used, these numbers may need to be increased. ▲
Figure E–3.
Using the operation application with Lookout enables you to monitor and
control analyzer operation from the remote workstation.
Real-time data from the analyzer is collected, displayed, trended, and archived
on the remote computer hard drive. The database files containing analyzer data
are accessible by other programs using ODBC or SQL. See the Lookout
software manual provided with the system or instructions in the software you
are using for more information.
Appendix E
The Workstation
SOLA II Flare User Manual
E-3