Thermo Scientific SOLA II Flare User Manual page 106

Thermo Scientific
Table A–1. Controller display & keys
Display/Key
Upper display
Zone display
Lower display
,
1 through 5
Description
When in the Home page, displays the process value.
Otherwise, the upper display shows the value of the parameter
in the lower display.
Indicates the controller zone:
1-9 = Zones 1 through 9
A = Zone 10
b = Zone 11
C = Zone 12
d = Zone 13
E = Zone 14
F = Zone 15
h = Zone 16
Indicates the set point or output power value during operation,
or the parameter associated with the value shown in the upper
display.
Indicates whether the temperature is displayed in degrees
Fahrenheit or Celsius.
The percent LED lights when values are displayed as a
percentage or when the open-loop set point is displayed.
This LED indicates the status of a profile. When lit, a profile is
running. When flashing, a profile is paused.
Indicates communication activity by flashing when another
device is communicating with the controller.
The number LEDs indicate output activity.
Press the Infinity key to back up one level, or press and hold the
key for two seconds to return to the Home page. Once on the
Home page, this key may be used to clear alarms and errors (if
they may be cleared).
Press the Advance key to enter the selected menu.
When in the Home page, use the Up and Down keys to adjust
the set point in the lower display. When in other pages, use the
keys to change the upper display to a higher or lower value or
to change a parameter selection.
SOLA II Flare User Manual
Appendix A
Watlow EZ Zone PM6 Series
A-2