Thermo Scientific SOLA II Flare User Manual page 74

Thermo Scientific
Following are the relays that can be accessed through the Set Outputs group.
Table 7-1.
Output Function
RLY 1 Spare Spare relay
RLY 2 Spare Spare relay
RLY 3 Spare Spare relay
RLY 4 Spare Spare relay
RLY 5 Spare Spare relay
RLY 6 Spare Spare relay
RLY 7 Spare Spare relay
RLY 8 Spare Spare relay
Inj V1 Solenoid Controls 10-port injection valve
Inj V2 Solenoid Controls 6-port injection valve
Rng V3 Solenoid Range selection valve
V4/ Solenoid 1 Solenoid Cal sample select
Solenoid 5 Generic output for sample control
Solenoid 6 Generic output for sample control
Solenoid 7 Generic output for sample control
Solenoid 8 Generic output for sample control
Chn 1 4-20 Press Enter to change the 4–20 mA output for Cal A to 4, 8, 12,
16, or 20 mA.
Chn 2 4-20 Press Enter to change the 4–20 mA output for Cal B to 4, 8, 12,
16, or 20 mA.
PMT Supply Shows only the active supply voltage
CNTRL 00 LED Control output for LED indicator
CNTRL 01 UV Lamp Control output for UV lamp
Bench CNTRL ## Reserved for factory test only; the 2 pound signs (##) indicate the control
output.
CNTRL 7 S&H Sample & Hold control
CNTRL # Gain Gain Control
Diagnostics
SOLA II Flare User Manual
Chapter 7
7-2