Electrical Power - Thermo Scientific SOLA II Flare User Manual

Safety Information & Guidelines
The system uses AC power at 110 Vac (an optional step-down transformer is

Electrical Power

available for 220 Vac). The AC power is converted to DC at several voltage
levels. Appropriate precautions must be taken to prevent sparks present in the
analyzer environment that may ignite combustible materials. Precautions must
also be taken to prevent electrical shock if the analyzer or sample system
enclosures are opened.
The AC power to the system must be free from noise, surges, sags, and spikes
for proper system operation. AC power circuit breakers and wiring must be
sized properly for the required current. All wiring installations must meet
applicable electrical codes.
The fuse is located on the analyzer terminal block.
Caution If it becomes necessary to replace the fuse, it must be replaced with one
of the same rating: Fuse, 3 A S/B (p/n TE-4510). ▲
Warning Remove power prior to performing any work internal to the
instrument. An override is available for use in non-hazardous areas; however,
removal of components while the instrument is energized is not permitted. ▲
Thermo Scientific SOLA II Flare User Manual xv