Appendix E
The Workstation
Diagnostic Signals
A user can select the Diagnostics button on the workstation main screen and be
presented with a snapshot of seven of the most significant values related to the
SOLA II Flare operation.
Figure E–6. Diagnostic Signals
SCS Controls
Clicking SCS Control displays a set of selections that allow the user to control
the SOLA II Flare validation range. Once a user selects an option, the
workstation will send a MODBUS command to the SOLA II Flare unit
commanding the unit to change its pneumatic outputs to select one of the 11
available valve configurations.
Figure E–7. SCS Control
Thermo Scientific
SOLA II Flare User Manual
E-7