Thermo Scientific SOLA II Flare User Manual page 92

Thermo Scientific
13. Insert the replacement heater into the housing.
Figure 8-7. Insert replacement heater into housing
14. Feed the two heater wires through the two fittings on the other side of
the housing.
Figure 8-8. Heater wires fed through fittings
15. Slide the wire sleeves onto the heater wires. Tighten the stainless steel
fittings.
Figure 8-9. Wire sleeves and fittings
Maintenance & Troubleshooting
SOLA II Flare User Manual
Chapter 8
8-12