Maintenance - Thermo Scientific SOLA II Flare User Manual

Appendix F
The X-Purge System

Maintenance

Caution Placing the Normal/Bypass switch in the Bypass position disables safe
operation of the system. The Bypass position is to be used only when required
for maintenance and only if the area is non-hazardous. ▲
Caution Do not open the explosion proof housing for the X-Purge unless the
area is known to be non-hazardous. ▲
Caution Do not leave the Normal/Bypass switch in the Bypass position after
maintenance is completed. Do not leave the analyzer system unattended when
the Normal/Bypass switch is in the Bypass position. Personnel must remove
power from the system immediately if hazardous conditions are suspected. ▲
Thermo Scientific SOLA II Flare User Manual F-8