Table of Contents
Advertisement
®
R&S
TSMA6B
9.10 Web GUI not accessible via WLAN
If the R&S TSMA6B web GUI is not accessible, perform the following steps to solve the
problem.
1. Check if the WLAN AP is activated.
●
●
2. For remote connection via WLAN, check if the TSMA6 WLAN is visible via your
smartphone/tablet.
●
●
3. Check if your smartphone/tablet is connected to the TSMA6B WLAN AP.
●
●
4. Open the browser on the handheld device and enter the following URL:
http://192.168.137.1.
User Manual 4901.4026.02 ─ 01
If "Mode" LED = blue, continue with
If Mode LED != blue, continue with
ted by external PC, mobile or
If it is visible, continue with
If it is not visible, continue with
by external PC, mobile or
If the connection is established, continue with
If the connection is not established, try to reconnect. If it fails again, contact
R&S support.
Web GUI not accessible via WLAN
step
2.
Chapter 9.9, "WLAN access point not detec-
tablet",
on page 111.
step
3.
Chapter 9.9, "WLAN access point not detected
tablet",
on page 111.
step
Troubleshooting
4.
114
Advertisement
Table of Contents
